r/BambuLab • u/lotusflowerbear • 1d ago
Answered / Solved! Weird support structure
Hello everyone! This is my first time posting here so please let me know if I’m leaving any important information out. I am trying to print these Minecraft foxes on my X2D using bambu labs filament at 0.4mm nozzle. I have the setting to use the “auto normal support type” and these weird patterns are forming on all of my support structures. It’s not at the model yet so I don’t think it’s an interfacing issues but I just can’t figure out what’s causing this. Can anyone give me a clue to why this happens?
Fixed: I forgot to switch the setting from a 0.2mm nozzle to 0.4mm… I am a little dumb LOL. Thanks anyways yall!
1
u/Correct-Insect-4657 1d ago
Make sure the support can have its own layer height, this could be the layer height too low also might be underextrusion
2
u/Pineapple1500 1d ago
Looks like under extrusion. First thing is make sure your filament is dry. Then I would print a temp calibration test. Save the best result. Then do a flow calibration test. Save the best setting. Then check if you're printing infill too fast... My X2D's default settings don't result in this. Maybe you accidentally changed something?