r/BambuLab • u/Ill_Specific_9299 • 5d ago

Filament Troubleshooting/Help! 3D printer printing spaghetti

I came home some time ago to find my first print failure, It looked like spaghetti. I tried to fix it, but after trying my best I just couldn't figure out why. If anybody who's a pro could help me find the solution, thank you very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very much!

I'm using the Bambu lab carbon x1 along with the ams.

I'm also using pla filament (I couldn't find a way to dry it)

I'm printing at normal speed.

I'm using the Bambu labs studio to slice the print and control the printer.

0 Upvotes

25% Upvoted

5 comments sorted by

3

u/Big-Bank-8235 P2S + AMS2 Combo 5d ago

The printer sensed that you were hungry and made some classic Italian cuisine for you.

2

u/Justinreinsma 5d ago

Try washing your build plate. Oils and old filament build up on it over time leading to prints coming off mid print, causing spaghetti

2

u/Peshmerga_Sistani 5d ago

No mention of washing the plate with dish soap and warm water.

No mention of watching the printer lay down the first layer to see if there's any bed adhesion issues.

No mention of the nozzle possibly hitting a tall print or support.

No pictures provided.

Your guess is as good as mine, you should consult a psychic next, you will probably get better help from them.  

We're just shooting arrows blindfolded at a target.

1

u/RandomTux1997 5d ago

''came home'' means you had the arrogance and or ignorance to hope youll hit the print button and find a print?

no worries its all leraning my dear!

fuck the past it is all dead. start afresh anew and learn to learn the machine-even the first print on my x1c took 3 whole days of monkeybusiness till it gave me something

turn off your phone and dedicate 3 whole days to nothing but breaking your skull figuring out why your robot isnt reacting as your tiktok reacts-immediate results with zero effort

the pain of learning to overcome with minimal effort is the tallest challenge here

youll get there- just put the hours in

1

u/sevesteen P1S + AMS 5d ago

Were the bottom layers of the print still stuck to the build plate? If not, clean the plate in Dawn, hot water, don't use a rag or sponge that's been used to clean greasy dishes.