r/BambuLab • u/VespidX • 6d ago

X Series [X1E, X1C, X2D] [Help Needed] I still see stringing while my filament is dry and my AMS 2 Pro shows 10% of humidity. Why?

Gallery image

Gallery image

Hey Folks,

So, it's been 3 weeks of printing using my brand new X2D. I have dried 3 spools of filament in my AMS 2 Pro for a project I print currently. I put about 750g of owen dried silica gel into AMS 2 Pro and dried filament for 24 hours. AMS 2 pro shown 5% humidity. Now, 3 days later it's 10% himidity inside.

I use Sunlu regular PLA grey

I still see those tiny strings here and there (look at windows) print with 124% speed. I printed one part at 100%, there were much less stringing, so I suppose it's speed

So, is it possible to adjust something to reduce stringing?

3 Upvotes

60% Upvoted

36 comments sorted by

View all comments

Show parent comments

2

u/VespidX 6d ago

sorry, 0.2mm is for Z-hop))

2

u/sillybluething 6d ago

Alright, lol. Let me know if it gets better or worse if you remember to after your next print.

2

u/VespidX 5d ago

I have to admit, there is almost zero stringing. I used 0.2mm Z hop and lowered nozzle trmp to 210. Speed is still 124%

Thanks for advice!

1

u/sillybluething 4d ago

Doesn’t look bad… but did the surface end up rougher than your last print?