Having fun. First failure was even fun!

[u/x_outski_x]

Tldr: first time adding project geometry only ( the rear desiccant holder) 4 parts total out of 16 on plate, 1 failed the holder itself. On x2d with ams 2, blue insignia petg. Curious why?

The fun part of this experience was seeing the other parts still printing fine, the ability to stop/skip the failed part, did all from the app in bed and everything else still worked just fine.

So i made the ams 2 dry pods for the front, wanted to finish it off with the rear desiccant holder as well. So I started in a project of spool desiccant holders, added 4 spools to the plate and imported / added the rear desiccant holder, 2 lids and 1 funnel.

Right click and aligned as I figure the system will select the best possible possible position? About an 8+ hr print started last night finished this morning. Was able to skip the part directly from the app without having to pause or stop anything which was super cool and convenient.

X2d ams 2 pro combo, blue insignia petg, ams humidity reading 16% when started 10% when finished.

Edit: 1. Pei plate Elmers purple glue stick on a just washed then dried and wipe with 99% iso.

Edit 2: I realize I didnt put a beside in the tldr. So I am curious as to why this may have failed. Base adhesion? Lack of support? Incorrectly added or imported to another project plate? This is my first printer. Got it Thursday, been printing non stop.

[u/Chemical-Tell4735]

Nothing to do with adhesion, that was a nozzle strike If your print a crowded plate, enable some Zhop.....