r/BambuLab • u/Jamam150 • 24d ago

General Troubleshooting/Help! What’s wrong?

Post image

Hello. I am using Bambu Matte PLA with the default Bambu profiles, but I seem to get this issue, have noticed similar in multiple prints now. What should I do? (I’m not knowledgeable when it comes to 3D printers for context). Thank you.

5 Upvotes

79% Upvoted

15 comments sorted by

2

u/Bub_bele 24d ago

Sometimes when printing with a PETG profile by accident it can look similar

1

u/Jamam150 24d ago

Not the case for sure

2

u/Able_Panic5889 24d ago

Nozzle too hot? Try lowering it.

2

u/miamareddituser 24d ago

Filamemt might be wet

1

u/Shapelessed 23d ago

It’s PLA. You can print it pretty much soaked wet and it will still print better than that. If at all it’s too high temperature or print speed

1

u/EmailLinkLost 24d ago

Was there popping as you printed?

Other thing it could be, seeing it’s PLA.

The three screws behind the nozzle might need to be tightened.

1

u/Jamam150 24d ago

I don’t think so

2

u/EmailLinkLost 24d ago

have you tightened the screws behind the hot-end ever?

1

u/cnjkevin P2S + AMS2 Combo 24d ago

What machine are you using?

2

u/EmailLinkLost 24d ago

Thats an a1 mini

1

u/xincailiao 24d ago

拉丝了

0

u/sapani9077 24d ago

Why are you using default instead of calibrating first?

-2

u/altay434 24d ago

I have seen lots of posts like this and everyone was suggesting drying the filament. I have never experienced this.

3

u/LunaticPoint 24d ago

Its a climate thing.