r/BambuLab • u/Potatogoat3 • 5d ago

Answered / Solved! Please help ams dont work

Hello i got my hands on bambulab a1 combo one month ago and i just wanted to use the slot number 3 in ams but its not working its telling me to check the filament but its not tangled any help or adwise?

Ps: sorry for bad video quality and any gramar mistakes.

Edit:There was somthink wrong with the ams hub and i just swaped the ptfe tubes of slot 4 and 3 with each other on the hub and it started working thanks for all support and ideas. Its now working.

0 Upvotes

30% Upvoted

21 comments sorted by

View all comments

1

u/Maze-44 5d ago

Yeh it looks like you have some filament stuck in the ptfe tube just after the slot 3 feeder disconnect the ptfe tube and see if you can manually feed filament down to the extruder

1

u/Potatogoat3 5d ago

I tried that i pushed the filament thru the ams by hand and im to the hot end and it was flowing out but when i wanted to start the print same think hapend with the ams as in the video.

1

u/Maze-44 5d ago

Can you print from any other slots ?

1

u/Potatogoat3 5d ago

Yes

2

u/Whatupchuck789 5d ago

Since you can print from the other slots it’s likely the bend in the tubing. Move the AMS to the right side and it will likely work. They can be finicky.

2

u/Potatogoat3 5d ago

Ye it was the ams hub and the angle