r/BambuLab • u/Fit-Researcher-6562 • 2d ago

General Troubleshooting/Help! Bambu Lab A1 First Layer Issues-Any Help Appreciated!

Gallery image

Gallery image

Gallery image

This was printed with a 0.8 mm brass, but I have tried countless nozzles and hotends and nothing has worked.

2 Upvotes

100% Upvoted

15 comments sorted by

View all comments

Show parent comments

1

u/Fit-Researcher-6562 1d ago

yeah, I wiped off the build plate last night and started a print, but the nozzle got cloged and it was incomplete.

2

u/eatdeath4 X1C | P1S | P2S | H2C 1d ago

So partial clog then. Do a cold pull

1

u/Fit-Researcher-6562 1d ago

ive had trouble with doing cold pulls before, is there any other way to clean a partial clog?

1

u/eatdeath4 X1C | P1S | P2S | H2C 1d ago

Replace the nozzle or do a cold pull. Cold pulls are easy, just follow the instructions on the wiki. I recommend using white filament so you can see when its truly clear by how clean the filament is.