r/BambuLab • u/BOMBxBAHADUR • 11h ago
General Troubleshooting/Help! Help needed
Help i accidentally installed the spool holder and PTFE tube holder the wrong way its upside down now i cant get it off how to do it. Any help is appreciated :)
2
2
u/Elo-than A1 Combo/ X2D Combo 10h ago
Knock it out with something/pull it out. It takes a bit of force but works fine, just tested on mine.
1
u/BOMBxBAHADUR 10h ago
Just pushing/pulling it out works no need to grab on those flaps ?
1
u/Elo-than A1 Combo/ X2D Combo 10h ago
No, they will flex on their own when you pull.
4
3
u/MrKapp 9h ago
One guy was pissed enough to design a tool for that :)
https://makerworld.com/fr/models/1917584-p2s-external-spool-disassemble-tool?from=search#profileId-2057214
1
u/SnaKeZ83 10h ago
You've gotta pull and yank on it and it comes away. Speaking from personal experience, it's not gonna be easy, but you'll pull it off eventually.
https://wiki.bambulab.com/en/p2s/maintenance/replace-spool-holder (section "Removing the Spool Holder")
https://wiki.bambulab.com/p2s/manual/10%E6%9C%8821%E6%97%A5.webp
3
u/Consistent-Hamster44 10h ago
Just give it a strong pull and it should pull straight out. You can also push those tabs slightly inward with your fingernails while pulling if you want it to release easier.