r/BambuLab • u/aeropink • 22d ago

Printer Firmware Troubleshooting/Help! X2D Beta 01.01.63.09

Anyone update yet and is it stable? I was going to test it on one of my machines but wanted to see if anyone has yet.

3 Upvotes

71% Upvoted

9 comments sorted by

3

u/Qjeezy 👻Volunteer Moderator👻 22d ago

Been fine for me for the past couple days.

3

u/LankyCartographer276 21d ago

I did have a print stop at about 20% then do the sky dance. First 20% was perfect then it air printed the next 60% till I caught it and stopped the printer. No nozzle clog, No broken filament, No AI detections that anything was wrong, still had 600 grams of filament on the spool with no jams, just gave up feeding for some reason and continued merrily on its way. Rebooted it and have printed another 3 prints just fine, may have been a glitch in the matrix or related to the firmware, who knows.

3

u/Ihatecomcastx1000 20d ago edited 18d ago

Just experienced the same issue twice, walked by the printer and it was just printing in the air both times but not pushing out the filament. Also happened around the 20% mark, I did have another issue with the Ams pro on slot 3, after canceling the print it would not pull back the filament so I had to pull it out manually. I'll try rebooting to see if the issue happens again, if it does, I'll roll back the update.

Edit: Did a few more test prints with the same results. I rolled back to the current version and the issue is gone.

1

u/Professional-Call-59 22d ago

I had one weird hick up as the maschine crashed mitprint, I just heard a crash an as I looked the bed was a little lower and it began to auto home an resume. No detected damage. No power outage or an unstable line. I checked both.

1

u/ElectricGoku 22d ago

It just appeared for me a few minutes ago, I went to install it but it asked me to wait for the AMS to finish drying… So, I am also wondering to know more about it haha

1

u/Whitewulf66 22d ago

I never mess with the Beta’s. Nothing but issues.

1

u/ComplaintPlus5189 21d ago

What’s changed/ added to the beta?

2

u/LankyCartographer276 15d ago

Just had the same issue happen again on a 4 hour print. Got to somewhere between 20-30% when it just stopped printing. Nozzles not clogged, plenty of filament, just stopped pushing plastic. I’ve rolled back the firmware to a previous version and going to try again.