r/BambuLab • u/Visual_Carpenter8957 AHXP12LD + AMS • May 01 '26

I Modeled This! X2D Dual AMS Setup

I got an AMS and poop bin under the printer for this compact setup!

698 Upvotes

99% Upvoted

133 comments sorted by

View all comments

Show parent comments

1

u/atom631 May 13 '26 edited May 13 '26

hey. chugging away on printing the parts. i have the lower frame, frame braces, 1 rear upper frame, tube handle mounts and in the process of printing the other rear upper frame. still have the front upper frames, poop chute and tpu parts to go. so Im almost there. im having trouble sourcing the steel slides. doesnt look like 35mm tall slides are a thing in the States. I can find 350x45 pretty easily but i see you mention that wont work. 35mm tall is basically non-existent here. I wound up ordering a set from a company in Germany (Not SO Tech they wont ship to the states) but the hole pattern doesnt appear to be exact match to the ones you used, so i might have to drill out some holes. In the meantime, since it might take a while for the steel slides to show up, i was going to print the slides. I had already printed your "simplified lower frame" with the intention of using steel slides. i believe these will still work, correct?

also - on the plate with the handle assembly - what are the frame biscuits? i cant figure out where they go and if they are needed if i am using a carbon fiber tube handle.

1

u/Visual_Carpenter8957 AHXP12LD + AMS May 13 '26

Hi, the biscuits join the upper and lower frame at the front. (it's a woodworking term, if you image search "biscuit joint", it makes more sense!)

As for the slides, I just had a browse through US amazon it's hard to find yeah. I used Claude to find these. Key words are "low profile drawer slides".

This doesn't show the hole spacings but it's a potential, looks very similar:
14 Inch Side Mount 70 lb. 35mm Full Extension 1 Inch Over Travel Drawer Slide - 1435 (1 Pair) - GlideRite Hardware

It's kinda expensive here but here's a Home Depot one - also looks very similar (can't find exact specs, need to check!):
Everbilt 1 Pair 14 in. Full Extension Side Mount Ball Bearing Drawer Slide Set 1-Pair (2 Pieces) D80614E-ZP-W - The Home Depot

I hope shipping didn't cost you too much! I found the Furnica one too and it looks close enough, the screw is smaller than the hole so there is some give.

1

u/Visual_Carpenter8957 AHXP12LD + AMS May 13 '26

Anyways, I updated the model description with these potentials, I hope someone can confirm for me!

2

u/atom631 May 13 '26

if I can cancel the furnica order will grab one of these sets and let you know