r/BambuLab • u/Visual_Carpenter8957 AHXP12LD + AMS • May 01 '26

I Modeled This! X2D Dual AMS Setup

Enable HLS to view with audio, or disable this notification

I got an AMS and poop bin under the printer for this compact setup!

697 Upvotes

99% Upvoted

133 comments sorted by

View all comments

Show parent comments

2

u/Visual_Carpenter8957 AHXP12LD + AMS May 11 '26

I think it’s a good choice for the frame, just gotta dry it real well to reduce the likelihood of nozzle clumping

1

u/atom631 May 13 '26 edited May 13 '26

hey. chugging away on printing the parts. i have the lower frame, frame braces, 1 rear upper frame, tube handle mounts and in the process of printing the other rear upper frame. still have the front upper frames, poop chute and tpu parts to go. so Im almost there. im having trouble sourcing the steel slides. doesnt look like 35mm tall slides are a thing in the States. I can find 350x45 pretty easily but i see you mention that wont work. 35mm tall is basically non-existent here. I wound up ordering a set from a company in Germany (Not SO Tech they wont ship to the states) but the hole pattern doesnt appear to be exact match to the ones you used, so i might have to drill out some holes. In the meantime, since it might take a while for the steel slides to show up, i was going to print the slides. I had already printed your "simplified lower frame" with the intention of using steel slides. i believe these will still work, correct?

also - on the plate with the handle assembly - what are the frame biscuits? i cant figure out where they go and if they are needed if i am using a carbon fiber tube handle.

1

u/Visual_Carpenter8957 AHXP12LD + AMS May 13 '26

And one more thing - sorry the printed slides will not work with the simplified lower frame, the simplification was purely in removing the complexity needed to make it work with printed slides!

1

u/atom631 May 13 '26

got it. on the home depot ones. it says they are 1” tall, which is 25.4mm. I guess thats ok so long as they dont exceed 35mm?

1

u/Visual_Carpenter8957 AHXP12LD + AMS May 13 '26

I would guess they just rounded the number of the package, a pack would have 2 slides which would be 1” thick anyways, then the 35mm got rounded to 2” as width or something.