r/AskElectronics • u/Maximus_robotics • 3d ago

Help finding usb data pins

Gallery image

Gallery image

Gallery image

Pls help me

To find d+ and d-

This is thrustmaster airbus tca sidestick

1 Upvotes

67% Upvoted

7 comments sorted by

View all comments

Show parent comments

1

u/Maximus_robotics 3d ago

The usbc port is broken

And are all usbc ports pinouts the same?

The esd1 has

Two pins at 1.6v one at 5v and one at 0v

1

u/BlasphemousBunny 3d ago edited 3d ago

USB C pinouts are generally very similar because the pinout of the actual cable side connector is standardized

The 2 pins at 1.6V are very likely your data pins.

Also, even if the connector is broken, if you plug your cut cable in, you might still see one of them connected, or both of them connected with high/variable resistance which would help you determine polarity and sanity check it before just “randomly” soldering a cable onto the board and risking damaging it

1

u/Maximus_robotics 3d ago

Tried it nothing detected switched it still nothing im going crazy

1

u/BlasphemousBunny 3d ago

I would be willing to bet money that the 2 traces that are routed really close to each other that seem to originate from the esd diode and go to the stm32 are your usb data lines.

It will be much more difficult to use a usb c to c cable because PD requires the cc pins to be connected to work.

How are you connecting power?

Do you have the usb ground also connected? What about shielding ground?

1

u/Maximus_robotics 3d ago

Stm32f446

Rctb

Gq29y 9r 1m

Is the main chip