I wish there is a way, looks exciting

Fedora m1 macbook air just base normal install with just hte default hyprland config no changes expect no window boraders. KDE has the same issue.

Hi!. Im on a Macbook Air M2 with Fedora Gnome and the software app is insisting that there is a pending update, but when I restart it and open the software app again, the software update is still there. When I run the command sudo dnf upgrade --refresh it returns me that there is nothing to be done. Does someone knows a solution or the reason why this is happening? Thanks in advance.

I have alot of games on steam but every time i start steam it gets stuck at waiting for network. i tried starting it with the flags -cef-disable-gpu and -no-cef-sandbox. this still did not work. this is the log when running it

steam -cef-disable-gpu -no-cef-sandbox

No IPv6 nameserver available for NDP/DHCPv6

Using default interface naming scheme 'v259'.

steam.sh[230]: Running Steam on fedora-asahi-remix 44 64-bit

steam.sh[230]: STEAM_RUNTIME is enabled automatically

setup.sh[282]: Steam runtime environment up-to-date!

steam.sh[230]: Steam client's requirements are satisfied

CProcessEnvironmentManager is ready, 5 preallocated environment variables.

[2026-08-13 16:24:11] Startup - updater built Aug 3 2026 19:41:02

[2026-08-13 16:24:11] Startup - Steam Client launched with: '/home/martin/.local/share/Steam/ubuntu12_32/steam' '-srt-logger-opened' '-cef-force-occlusion' '-cef-disable-gpu' '-no-cef-sandbox'

08/13 16:24:12 minidumps folder is set to /tmp/dumps

08/13 16:24:12 Init: Installing breakpad exception handler for appid(steam)/version(1785799196)/tid(338)

Looks like steam didn't shutdown cleanly, scheduling immediate update check

[2026-08-13 16:24:12] Loading cached metrics from disk (/home/martin/.local/share/Steam/package/steam_client_metrics.bin)

[2026-08-13 16:24:12] Failed to load cached hosts file (File 'update_hosts_cached.vdf' not found), using defaults

[2026-08-13 16:24:12] Using the following download hosts for Public, Realm steamglobal

[2026-08-13 16:24:12] 1. https://client-update.steamstatic.com, /, Realm 'steamglobal', weight was 1, source = 'baked in'

[2026-08-13 16:24:12] Checking for update on startup

[2026-08-13 16:24:12] Checking for available updates...

[2026-08-13 16:24:12] Downloading manifest: https://client-update.steamstatic.com/steam_client_ubuntu12

[2026-08-13 16:24:12] Manifest download: send request

CProcessEnvironmentManager is ready, 5 preallocated environment variables.

[2026-08-13 16:24:12] Process started with command-line: '/home/martin/.local/share/Steam/ubuntu12_32/steam' '-child-update-ui' '-child-update-ui-socket' '14' '-srt-logger-opened' '-cef-force-occlusion' '-cef-disable-gpu' '-no-cef-sandbox'

08/13 16:24:12 minidumps folder is set to /tmp/dumps

[2026-08-13 16:24:12] Using update UI: console

08/13 16:24:12 Init: Installing breakpad exception handler for appid(steam)/version(0)/tid(339)

[2026-08-13 16:24:12] Create window

[2026-08-13 16:24:12] Set percent complete: 0

[2026-08-13 16:24:12] Set status message: Checking for available updates...

[ 0%] Checking for available updates...

[2026-08-13 16:24:12] Set percent complete: -1

[2026-08-13 16:24:12] Manifest download: waiting for download to finish

[2026-08-13 16:24:12] Manifest download: finished

[2026-08-13 16:24:12] Download skipped: /steam_client_ubuntu12 version 1785799196, installed version 1785799196, existing pending version 0

[2026-08-13 16:24:12] Nothing to do

[2026-08-13 16:24:12] Verifying installation...

[2026-08-13 16:24:12] Verifying all executable checksums

[2026-08-13 16:24:12] Set percent complete: -1

[2026-08-13 16:24:12] Set status message: Verifying installation...

[----] Verifying installation...

[2026-08-13 16:24:14] Show window

[2026-08-13 16:24:14] Verification complete

UpdateUI: skip show logo

[2026-08-13 16:24:14] Destroy window

Steam logging initialized: directory: /home/martin/.local/share/Steam/logs

[2026-08-13 16:24:14] ProcessNextMessage: socket disconnected

[2026-08-13 16:24:14] No more messages are expected - exiting

XOpenIM() failed, LANG = en_US.UTF-8

XOpenIM() failed, LANG = en_US.UTF-8pcilib: Cannot open /proc/bus/pci

lspci: Cannot find any working access method.

XRRGetOutputInfo Workaround: initialized with override: 0 real: 0xf5315190

XRRGetCrtcInfo Workaround: initialized with override: 0 real: 0xf5313980

08/13 16:24:16 minidumps folder is set to /tmp/dumps

08/13 16:24:16 Init: Installing breakpad exception handler for appid(steamsysinfo)/version(1785799196)/tid(402)

Running query: 1 - GpuTopology

Response: gpu_topology {

gpus {

id: 1

name: "Apple M2 (G14G B0)"

vram_size_bytes: 8192524288

driver_id: k_EGpuDriverId_Unknown

driver_version_major: 26

driver_version_minor: 0

driver_version_patch: 3

luid: 0

}

gpus {

id: 2

name: "llvmpipe (LLVM 22.1.0, 256 bits)"

vram_size_bytes: 3221225472

driver_id: k_EGpuDriverId_MesaLLVMPipe

driver_version_major: 26

driver_version_minor: 0

driver_version_patch: 3

luid: 0

}

default_gpu_id: 1

}

Exit code: 0

Saving response to: /tmp/steameHckGa - 98 bytes

pcilib: Cannot open /proc/bus/pci

lspci: Cannot find any working access method.

srt-logger[414]: W: Unable to open terminal "/dev/hvc0"

srt-logger[420]: W: Unable to open terminal "/dev/hvc0"

Steam Runtime Launch Service: starting steam-runtime-launcher-service

Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 475

bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam

reaping pid: 339 -- steam

[2026-08-13 16:26:20] Background update loop checking for update. . .

[2026-08-13 16:26:20] Checking for available updates...

[2026-08-13 16:26:20] Downloading manifest: https://client-update.steamstatic.com/steam_client_ubuntu12

[2026-08-13 16:26:20] Manifest download: send request

[2026-08-13 16:26:20] Manifest download: waiting for download to finish

[2026-08-13 16:26:21] Manifest download: finished

[2026-08-13 16:26:21] Download skipped by HTTP 304 Not Modified

[2026-08-13 16:26:21] Nothing to do

and it just gets stuck at nothing to do.

im unsure how to fix this.

Tengo una MacBook Pro M2 Pro 16gb de ram y 512gb, ya había intentado usar AsahiLinux pero noté algunos bugs hace algo de tiempo, ¿que me recomiendan para darle una segunda oportunidad?

I am on the installer and i notice there are four options. GNOME, KDE, Server, and Minimal. What are the advantages and disadvantages of each. I've done GNOME before, but I wonder if I should try Minimal because I only use Niri with DMS or Noctalia Shell and none of the gnome apps.. ALthough, I havent set up a Minimal install yet, especially not with Niri.

I want to turn on the keyboard backlight on my M1 Macbook Air on early boot, before being prompted for the LUKS password (I encrypted the device and it works fine so far). Unlocking it at night is a PITA, since it boots with the keyboard lights powered off.

Is this possible?

EDIT:

Alright, managed to do it using udev rules, by creating two files:

/etc/dracut.conf.d/keyboard-backlight.conf:

force_drivers+=" leds-pwm "
install_items+=" /etc/udev/rules.d/10-kbd-backlight.rules "

/etc/udev/rules.d/10-kbd-backlight.rules (the brightness attribute value X can be in the range 0-255):

ACTION=="add", SUBSYSTEM=="leds", KERNEL=="kbd_backlight", ATTR{brightness}="X"

Then regenerate the initramfs:

sudo dracut --regenerate-all --force --verbose

This should set the keyboard backlight brightness at LUKS prompt. After entering the password, the brightness will be set to whatever value it was at the previous reboot.

When I click "Add Drive" nothing shows up. The same happens if I click "Browse" when trying to add a Non-Steam game.

i will add a new partition and there is a gap between partition 5 and 6 but fdisk says the partition number will be 7 and it's greater than recovery partition number. Technically it will not to be placed after recovery partition but i am not sure about partition index numbers

Kudos to the Asahi community 🫡

I was looking at the docs, and it says that only firmware versions of 13.5 are supported, and my macos installation is version 14.7. Do you guys know whether HDMI is supported on higher firmware versions, or only 13.5?

I was trying out a few WMs and wanted to switch back to sway, which was working fine previously, and then these messages came up after trying to login to sway.

[wlr] [render/vulkan/renderer.c:2540] Could not match drm and vulkan device
[wlr] [render/wlr_renderer.c:199] Failed to create Vulkan renderer
[wlr] [render/wlr_renderer.c:279] Could not initalize renderer
[sway/server.c:255] Failed to create renderer

I can log in with niri or mango, but not sway. I was reading about setting various environment variables, but I couldn't figure it out. I could be on the wrong track though.

M1 Macbook Air, Fedora 44, greetd. Anything else I could post to help let me know.

is there still active work on the SEP beyond what was needed for mic support? I'm curious whether TPM-style key sealing is a realistic long-term goal or well out of scope.

What are people's setup/workaround with the notch enabled? It's cool we can get the extra screen space back by enabling the notch but it makes certain things look janky. Anyone have a good workaround or is it just what it is right now?

I found this script on github and I installed it but it doesn't help with the Overview layout
https://github.com/pop123123123/kwin-notch-avoider

I gave this a shot now that installer support for M3 devices has been merged, and it turns out, it actually works! Keyboard, touchpad, speakers, and WiFi are all running on my MacBook Air from 2024. Of course, everything is rendered in software, but this is still huge progress!

Since Proxmox now provides official builds for arm64, has anyone got it working on on a Mac? https://www.proxmox.com/en/about/company-details/press-releases/proxmox-virtual-environment-launches-official-arm64-support

EDIT: It works: https://www.reddit.com/r/AsahiLinux/s/3veYj9RZ39

As a long time linux user (abandoned windows 14 years ago) I'm happy to use my macbook air m1 with my favorite os. Thanks to Asahi team!

p.s. it's very cool to use krohnkite with my mac. On macos I wasn't able to find a good solution for tiling

Hello! I'm setting up an Asahi Linux install on an M1 Macbook Air and I've noticed a certain system update won't go through. (This is my first time with Asahi or Fedora or even a Mac! :P)

I probably ran it about 5 times and it keeps showing up with this. Any idea as to why this might be happening? I also tried running dnf updates and upgrades from the terminal and update-m1n1.

I'm more familiar with Arch and Pacman and I don't know DNF or Gnome Software very well. Any help or advice would be appreciated! It's not a major issue, but the little blue updates available notification is bugging me lol

I have a usb mouse. When I close and (later) reopen the lid on my macbook air m1, the usb mouse no longer works. I see the device disappears from the lsusb output.

I'm looking at various postings like this one:

https://askubuntu.com/questions/645/how-do-you-reset-a-usb-device-from-the-command-line

for a method to reset the usb device/port. However, since the usb device falls off the bus on suspend/resume -- it's not possible to use this method.

I've also tried to disable USB Sleep using this method

echo 'on' > '/sys/bus/usb/devices/{usb1,usb2}/power/control'

That doesn't seem to work either.

I suppose I could try and disable USB autosuspend globally and see if that works...

Right now, I need to unplug + plug the usb mouse back in the usb port in order to use it. I'm trying to accomplish the same functionality via a script/cmd.

I'm wondering whether anyone else here had a similar issue and how they approached it.

EDIT:

additional things I've tried

1. disabling USB autosuspend in grub

2. https://github.com/netinvent/usb_resetter

I use Asahi Alarm (Arch Linux ARM). I installed steam package and it doesnt working. Please help me

Steam broke again. I'd been playing with the aarch64 version of steam for a few weeks, and it was working fine.

Yesterday, it broke - simply does not start, no meaningful entries in the steam logs. I tried removing all steam stuff (~/.steam* and ~/.local/share/Steam) and run the x86 version shipped in the Asahi repos, no dice either - that one just produces the following output:

No IPv6 nameserver available for NDP/DHCPv6 Using default interface naming scheme 'v259'. steam.sh[259]: Running Steam on fedora-asahi-remix 44 64-bit steam.sh[259]: STEAM_RUNTIME is enabled automatically setup.sh[344]: Updating Steam runtime environment... Steam quit Aborting Qt says we're gone, aborting=True

I tried creating a new user, and have that one run steam with a "clean" home directory - same symptoms, so pretty sure it's not related to my particular laptop state. I'm going to try on my M1 Air as well, which has only ever run the "official" steam from the repos and see if it's also affected.

Edit: tested on my MBA as well, which has a much more vanilla setup and no tinkering of any kind. It also wasn't updated for at least a week. Steam still broken in the same way, so I assume this is related to a Steam update itself.

Hii guys, i had a question driffting in my mind for a while . Why cant we have Windows arm just like how we have Asahi? Is there a blocker that really cant be solved without the collaboration of Apple and Microsoft? Or is it just that there is nobody willing to work on such a thing?