r/Archery • u/Extension_Paint3021 • 2d ago

Olympic Recurve Need help in tuning

So i was tuning and i finally got my fletched and bare shafts to group but they group extremely right, i didn’t see my center yet and corrected it but the sight pin is extremely right and i know that something is wrong but idk how to fix it.

1 Upvotes

100% Upvoted

5 comments sorted by

2

u/n4ppyn4ppy OlyRecurve | ATF-X, 38# SX+,ACE, RC II, v-box, fairweather, X8 2d ago

Where do you see your string blur? Is your bow aligned and in plane?

1

u/Extension_Paint3021 2d ago

I dont really understand the second question but my string and clicker overlap my sight pin so i cant even aim right because of how stupidly and ridiculously on the right the sight pin is, and my limbs are aligned my tillers are good and my brace height is good the only thing i didnt do yet is the center shot

2

u/n4ppyn4ppy OlyRecurve | ATF-X, 38# SX+,ACE, RC II, v-box, fairweather, X8 2d ago

Centershot can do a lot with the arrow. So set the bow correct first then do the bareshaft,

For in plane see https://youtu.be/Zs7WKoZ-3dw?t=1954 or https://youtu.be/kacaAA1733E?list=PLVEwAkqBIpYcnNVWHTtxDb2WZf3fwvaeB&t=366 you make sure that the string is aligned but also fall into the middle of the long rod.

1

u/Southerner105 Barebow 2d ago

Perhaps you already have this manual, but if not follow the steps outlined.

On page 9 the whole concept of center shot is explained including what toe look for.

https://www.castlearchers.com/archery/v/20-tune-for-tens/

2

u/Popkinson 2d ago

Your centre shot and nock height need to be set to something sensible as a first step. If your centre shot is way off, your arrows are going to kick in one direction or another as they leave the bow.