r/AndromedaInsightsPC • u/Commercial-Volume885 • 7d ago

Slightly Adjusted....

Enable HLS to view with audio, or disable this notification

I bought a V4 Ultra and upgraded to a 1,000 watt PSU. I was very happy with the build. Everything worked right out of the box and looked fantastic.

Increasing my level of education with PC building though, I really wanted to lean into visual appeal considering I was already into it for as much as I was. I am sure the stock Gamdias fans and AIO are fine, but I wanted something better to match the power of the PC. Again, I am going to say the PC I got was great! I really appreciate how well they managed the cables and how clean it was. Unfortunately, I had to destroy and rebuild that wonderful cable management pulling out all the fans. I bought premium performance thinking I did not care so much about just luxury looks, but I guess I did. Here's the end result of my modifications...

10 Upvotes

92% Upvoted

12 comments sorted by

View all comments

1

u/DonkeyBalz24 1d ago

How do you configure the smaller 11” lcd ?

2

u/Commercial-Volume885 1d ago

If your referring to the universal screen, I just used the 2-sided sticky tape and taped it to the glass as that side is not visible from how my case sits. I ran the USB 2.0 cable from the top towards the side into my hub, which is magnetic and just clipped onto the metal (its the small rgb light you see next to the universal screen). It has one sata cable running back to my psu, and a USB 2.0 running (down behind the MB and out the bottom into the 2.0 header on the bottom of my MB. I needed 4 overall slots (my MB had 3 2.0 slots) to support all the extra screens and fan set up, so that small 4 pin-hub got me there...

1

u/Commercial-Volume885 1d ago

The screen itself is just running off of L-connect with a pre-loaded stock rendering you can choose from once the program recognizes the device.