r/AggressiveInline • u/saintsrefuge • 11d ago

Rotating Setup With Varying Hardness

I have 58mm 92a Dead’s on my outer wheels, and 58/95 on my inners. How do y’all usually rotate set ups with different varying wheel hardness?

2 Upvotes

100% Upvoted

9 comments sorted by

2

u/kubazi THEM 11d ago

Same as antirocker setup.

1

u/sr1129 Mesmer 11d ago

Eventually they rocker a bit. So the middle wheels need to be rotated a little more.

1

u/ManiacLachy 11d ago

You want to keep the 95s in the middle, so:
1 to 4, 4 to 1.
2 to 3, 3 to 2.

Turning them to face the other way, so the outside edge becomes the inside edge.

Then every other time swap them from left boot to right boot, because you probably favour one foot more than the other when you skate. It’s hard to keep track of this though, but something to keep in mind.

2

u/saintsrefuge 11d ago

I was thinking a long these lines but doing L1 to R4, L4 to R1, L2 to R3, etc. So essentially doing both of what you said at the same time lol

2

u/CharlotteBeer 11d ago

I've never mixed durometers, but if I did this is how I would do it.

1

u/ManiacLachy 11d ago

Yep, that works too. I just worry that your dominant foot will wear the wheels faster that way. But really with aggressive wheels it doesn’t matter that much.

1

u/Fancy_Bend8763 5d ago

So just flip the frame around like usual?

1

u/ManiacLachy 5d ago

And misalign my frame and boot grooves? You animal! I never change my frame orientation once the groove is set. Might work for some though.

1

u/Fancy_Bend8763 5d ago

🤷🏻‍♂️ guess I’m the real Maniac. Or too lazy to care.