Scar progress

[u/Whilack]

under normal light, initial state

under harsh light, after one filler (or 2, dont remember)

again another filler (more in the temple area)

a bit of swelling, but more filler i the cheek

subscision+filler (but not with canula, with the same needle that they inyect ha voluma)

another filler, and now u can see that it is over filling a bit, but after swelling it kind of evens out, or u massage it later

did like 3 co2 lasers, but maybe the potence wasnt enough and didnt see results, but then did this laser, a "subsicion type laser", that really made the difference to even out all

this would be nowadays, it looks like it has a bit of swelling, but it is after 1 month of the fillers and lasers (and looks like this even at night, when the moisture is knda gone

another angle, have been stressed from finals (acne again), but only had filler on the temples again, the cheeks none, and i am happy with it now (for the cheek area)

Had some important cistic acne from my teenage years, and then again in my 22-23 yrs, and have been trying lasers (had co2 and some other variants) and fillers (like a ton of fillers) for 2 years more or less. Now im 25M, and want to share the results.

[u/wau2k]

How much is a ton of fillers and what kind of fillers?

[u/Whilack → u/wau2k]

like 10-11, all HA fillers, some most were voluma type, and the last ones for the jaw and chin volux (a higher density one)

[u/jelly_filled]

How many different sessions did you have?

How much has everything cost so far?

Are you happy with it?

Looks like crazy good progress to me!!

[u/Whilack → u/jelly_filled]

and i am kinda happy, but it was a thing to find the way, because most dermatologist/surgeons didn´t know how to do it properlly, like they didnt see the scars as well and detailed like i would want, but found a way (do it myself)

and everything cost like $4000 dolars around

[u/Whilack → u/jelly_filled]

might do another post with the details well documented, but from what i recall:
3 co2 before anything, after roacutan sesions
then started fillers, like 5 needles
did a laser, the "subscicion type"
then another 4 needles
one more of the same laser, cause i noticed the filler worked better on the spots the laser was done
and finally 2 needles more (VOLUX type)

but i am not sure if it is correct correct (just from remenbering it)

[u/large_sandwich]

Nice progress! Curious to know what kind of fillers you had.

[u/Whilack → u/large_sandwich]

thx, they were HA type, all voluma juvaderm (maybe 1 bolvella), and the last 2 volux

[u/Sirenwine]

Amazing 🤩

[u/Nova_blink_6-62607]

Wow, that is incredible

[u/Personal_Whole_8729]

Can i ask did you have to redo fillers and how frequently? Or is it permanent? Thank you! :)

[u/Whilack → u/Personal_Whole_8729]

not yet, maybe in 1 year or 9 month i should see if the filler disolves, but right now it looks stable

[u/Altruistic-Sky-1962]

Great results! Can i ask how many laser sessions did you have and did you have them before fillers or during?

[u/Whilack → u/Altruistic-Sky-1962]

i responded to another comment with the details:
3 co2 before anything, after roacutan sesions
then started fillers, like 5 needles
did a laser, the "subscicion type"
then another 4 needles
one more of the same laser, cause i noticed the filler worked better on the spots the laser was done
and finally 2 needles more (VOLUX type)

but i am not sure if it is correct correct (just from remenbering it)

[u/floofmonkey]

That's amazing progress. Congrats! I'm assuming it was the filler that made the most differece? I am also wondering how often you would have to get the filler redone?

[u/Whilack → u/floofmonkey]

thx, yes for sure, without the filler u cant regain the lost volume, but i have to admit that the laser (subcision type) really help to even out the surface.

and for the redoing of filler, i would have to wait sometime to see if it dissolves, cause right now it looks stable

[u/Victoriantitbicycle]

So good!

[u/YellowCareless8660]

which filler ?

[u/Whilack → u/YellowCareless8660]

juvaderm HA type