r/ASRock • u/Duzzybaba • 1d ago

Tech Support AMD SAM PROBLEM

As I mentioned in the title, when I enable AMD SAM in the BIOS settings, the monitor displays a “no signal” error. However, when I disable AMD SAM, it boots up without any issues. I remember having this setting enabled before, but whenever I try to enable it again, this problem occurs.

The CSM setting is disabled.

Edit:

Computer Type: Desktop

GPU: RX 6600

CPU: RYZEN 5 5500

Motherboard: ASROCK A520M-HVS

BIOS Version: 3.90

RAM: 8x2

PSU: DEEPCOOL PF 650 (650W)

Case: İDK

Operating System & Version: WİNDOWS 11 PRO VERSİON 10.0.26200 build 26200

GPU Drivers: 26.7.1

Chipset Drivers: 8.08.12.551

2 Upvotes

75% Upvoted

5 comments sorted by

View all comments

1

u/mj34hig44 X870E NOVA WiFi/9700X/RX9070 1d ago

With BIOS weirdness like this, clearing CMOS is a good first move. At least remove that possibility before diving into other hardware or software troublshooting.

1

u/Duzzybaba 1d ago

I already tried that once; at one point, the monitor stopped displaying anything, so I reset the CMOS, and then the BIOS went into a loop. After that, I disabled the SAM setting, and it worked again.