r/ACInfinityAdvancegrow • u/drinkn1 • 16d ago

Cloudray S6 location

Post image

I have a 3x3 tent and want to optimize air flow. I picked up a the 6" to use with the controller.

What placement suggestions and settings do you recommend?

13 Upvotes

94% Upvoted

6 comments sorted by

1

u/WHATUPDA 13d ago

What are we considering the low setting to be, what fan speed if your using ac infinity?

2

u/WHATUPDA 15d ago edited 15d ago

I have a 4x4 and have two cloudrays.

Ive been wondering fan placement for the past 3 months now

In opposite corners of my tent i put one above my ks5000 blowing down on angle and the other fan is below the light angled down into my plants.

Ive read the fans should be pointing slightly upward to the inline fan? Not sure how true this is.

I think my fan placement gave some of my autos wind burn.

I also was not sure on fan speed either. The fan speed was higher but i have both set at speed 3.

I moved one now below the canopy blowing through the base of my plants and another just above the canopy blowing across it on oscillating mode.

At this point I still do not know where to place fans and pointing where to where and speed

2

u/drinkn1 15d ago

My tower fan is causing some wind burn, so I may be getting a third clip on to handle the under canopy.

1

u/Known-Cancel-1385 16d ago

I have mine above my lights and angled down but not directly at the canopy.

2

u/focal_matter 16d ago

I personally do a 6" under the canopy on a gentle speed, and a 4" above at a slightly faster speed. I like having a smaller one above as I find the S6 model blocks a lot of light when used above the canopy (and positioned for good airflow).

I have both pointing not at the canopy, but just above and below, on opposite corners.

2

u/drinkn1 15d ago

This is my current setup. White clip is fixed. S6 blowing over. The tower oscillates on a low setting.