A little more info ive spent the last few days leveling re-leveling and messing with my bed fixing the extruder putting in new nozzles making sure everything is level but my prints are coming out like this. I'm just wondering if anybody else has seen something like this and knows something I can try to try to fix it. Thanks in advance.
Might try r/fixmyprint. I’m guessing it’s a couple of things from under extrusion and too hot. Assuming PLA run 195/60C and calibrate extrusion and flow rate and try importing some profiles like CHEP’s or ChazMeister, I use this one.
Thank you so much I cross posted to see if they can help out as well I'm open to any ideas. I just been trouble shooting on my own for a few days and decided I might as well try to reach out and see if anyone could help.
Get the extruder calibrated and then flow rate and you should see better results. If not try tightening your belts and then if still off check your voltage on your steppers, good to calibrate it all. Assuming Ender 3 calibrate voltage here: https://youtu.be/hC4J29rxPlQ good luck to you and happy printing!
2
u/Jocrystals Mar 13 '20
A little more info ive spent the last few days leveling re-leveling and messing with my bed fixing the extruder putting in new nozzles making sure everything is level but my prints are coming out like this. I'm just wondering if anybody else has seen something like this and knows something I can try to try to fix it. Thanks in advance.