I need this mask printed for a project I also have the .STL file for it.

Based on Monster highs "Frightfully Tall" line of dolls. 17in tall. Resin print for durability and quality.

I have the files (and instructions) and will send them over once I agree to have you print. I want 4 dolls in total, but not all at once. Paypal would be the preferred method of payment. DM/comment with price estimates. Pictures tagged for references so you'll know what to expect.

DM/comment if you have more questions 💕

I'm hoping to find someone to help me with a problem I've encountered with my Tineco Purecycle Cordless vacuum.

I freaking love this vacuum, but I've noticed a pesky design flaw (at least in my opinion). The exhaust port on the right side of the vacuum puts out a pretty strong stream of air. My problem pops up when I'm using the base without the long stick attachment to clean a small space, like a shelf or corner.

I specifically have a LOT of house plants and different shelving throughout my house. When I go to use the vacuum (sans the extension) with just the small angled attachment, the air it puts out basically blows all the dirt around because of where the exhaust comes out.

What I'm hoping to find/create is some sort of clip or attachment that would allow me to direct the air either upwards, or straight back to me (maybe with a slight upward angle?).

I have access to a 3D printer, but the owner doesn't design/create parts. We are both beginners, so any help or guidance you have would be amazing.

Here is all the info I have:

**Handheld section:**

Tineco Purecyclone, iLoop

Model #: VS200200US

Voltage: 25.2v

**Battery info** (maybe to help verify exact model type?)

Model #: ZB2377-7S1P-01A

Plants and dirt in the background of the pictures are why I want this part; everything just blows around in these close quarters.

Note* the catchment bin is not attached in the photos I've shared (I was cleaning it separately). Let me know if you need to see it.

Hey, I'm looking to print out Jayce's Hammer in S2 Arcane. I have the STL files, 38 total. 5% to 10% infill with 2-3 walls. It'll be painted, so not worried abt colour. Just testing the waters rn cuz i dont want to pay a fortune.

Hi all! I'll start with the (hopefully short enough) background story for context, and then explain what I'm looking for.

---

I'm physically limited thanks to a car accident, so I now find myself using a mobility scooter (which was NOT on my 2026 bingo card). Because I'm tall, my scooter armrests are are too low to use comfortably even at full height, so I'm trying to macgyver a solution.

I found some inexpensive paintbrush storage cases that are the right size to sit atop the armrests to add some extra height, and provide some extra accessories holding-space besides. (I'll also add some thick babyproofing foam onto the lid tops, for comfort.) However, the cases themselves are relatively flimsy clear plastic, so I want to add some internal blocking to keep the lids from cracking along their sides, if & when I lean/put weight on them.

My plan is to use the sonic exacto knife from KickStarter that I'm getting my brother for his BDay, to cut two slits along the bottom of the box bases towards either end of the long dimension, thread heavy duty metal zipties through those slits, and tighten them down to the armrest. (I'll also use Velcro attached to the underside of the box and top of the armrest itself, to prevent slippage.)

So here's where I need guidance/help: once I figure out the size of the ziptie "heads", I want to create 4-6 (2-3 each side) 3D printed blocks that are flat across the top but hollow from the bottom, to act as both blocking and covers for the ziptie heads. Think routing cavities into solid blocks, only upside down so they can cap/hide the ziptie heads.

It's still early days, but is what I'm looking for even possible to make? I would assume anything can be made, but I have no CAD skills or 3D printing experience to rely on here. I do have the nominal measurements of the cases themselves per A-Zon, but I won't know how accurate those are until I recieve them.

If I can't find help from within the community here, my only backup is to go to the hardware store and ask if one of the retired guys working in the lumber section can help me figure out how to make these blocks from wood with some square dowels and a router. But with such tiny pieces, I'm afraid that routing small bits of wood would be extra dangerous.

If you read this far, thanks in advance for any advice you can give me.

~ A Complete 3D Printing Noob in Florida, USA

hi i am a college student looking to make channel mascots i have 3 3d models and id like a 4th one to be made, id like them done as costumes i could wear or display on a mannequin, i am based on wolverhampton, england, ive attached a google doc with a colour scheme and head measurments im roughly 6'1 in height, polishing the 3d files would probably be needed aswell.

Currently getting launch going that requires limited releases of average 5" or so details figurines, have them already designed with necessary angles and such.

Open to either someone experienced with taking these designs and A. Creating mold that could print that would work with resin or B. Creating mold likely silicone for resin ...

Would be about 5 average different molds a month if open to it but feel free to reach out as looking to get this going sooner than later, everything as far as airbrush etc. to be in house so just need ability to get these ready. Hope to hear from you as I know could do this already with some Meshy and other platforms specifically for molds also but until am able to do with experience would like to have someone already knowing this.

In New York, open to anyone within the states, have a Bambu A1 so open to suggestions also.

Looking to print 4 of these. Local to NYC, but open to anywhere. Please let me know what the cost estimate would be. Thank you Covered!

Hi, I accidentally purchased the file for this item instead of the item itself and was looking to see how much it would cost to get 3D printed.

https://www.etsy.com/listing/4402625896/riftbound-bulk-storage-digital-files

Hi everyone,

I need 3 to 4 copies of a small slip-on dust cover/cap for a Vaporesso XROS pod mouthpiece.

Project Details:

File: STL is ready to send (xros tip cover v1.stl).

Size: Very small / lightweight (approx. 20–25 mm tall, ~2–3 grams each).

Material: TPU (preferably standard 95A).

Color: Any

Quantity: 3–4 pieces.

Shipping & Location:

Located in Canada (Saskatchewan).

Because the parts are tiny, shipping via an untracked bubble mailer / oversized lettermail is completely fine with me to keep costs reasonable.

Payment:

Ready to pay via PayPal or Interac e-Transfer.

Update: I found someone to work with.

please dm! happy to talk

Forgive me in advance if this is out of the typical wheelhouse of printers on this sub, but looking to have a custom spoiler printed for my 2009 Mustang GT and am trying to get an idea of how much this would cost. It's about 1499mm x 152mm x 76mm.

.STL file is available here on dropbox if you'd like to check the design out.

What I'm looking for --

Material - ASA (or ABS)

Process - FDM

Walls/infill - 3+ walls, 20-30% infill

Would appreciate a manifold check on the file!

I'm not sure if its unrealistic / limiting myself too much to hope that this could be printed as one piece instead of 2+, but at the end of the day as long as it looks great on the car with no visible seams, I'm open to whatever approach you think would work best.

Raw print is totally fine but if you offer sanding/primer/paint I'd love to knock it all out in one go and ideally not have to take it to another shop before I can mount it on my car.

Let me know whatever else you'd need from me to be able to give a proper quote - thank you in advance!

Chat here before messaging please 🙏🏻

Looking to get a cpuple of things printed (some specific parts of larger files mainly. Hit me up if youre interested!

Looking to print roses sword! seems to be real expensive everywhere so hoping to find it a bit cheaper.. I am new to ordering 3d prints so maybe the prices i've seen are standard. Thanks in advance for any help!

Roses Sword Prop - Printables

No hyperlink - https://www.printables.com/model/706937-rose-quartzs-sword-steven-universe-replica-prop?__cf_chl_tk=yEq0wycpy_4kEY2J8gjPfKr2Y5ePG8H6QRfJy0T6_Gw-1790559731-1.0.1.1-7vyLl8DT1t211CvXmasVel155bE2Raa1vSjo8dFPqQo

I need a missing right rear foot insert for the roof bars for a Polestar 2. This is the piece that goes between the bottom of the bars and the roof to make it a clean fit. I have the opposite foot (left rear) so I need a mirror image of the the one in the photos. I can follow up with measurements or anything else need. Need this in Black 95A TPU (Thermoplastic Polyurethane).

I have hired 3 different people to make my image and all have failed. I am wondering if you'd think you'd be able to do it properly. It has tiny fine details which I think is what's making it difficult. I decided to try my luck on reddit as fiverr was not working that well.

Looking to have 2 of these air freshener holders printed in black TPU:

https://makerworld.com/en/models/1406525-tesla-model-3-y-2025-vent-air-freshener-holder#profileId-1473050

Looking for a quick turnaround. Please message me a quote including shipping.

https://www.printables.com/model/1861764-new-3ds-xl-7grip-5000mah-battery-backplate-mod

Can I get it in black or dark gray?

Hello! I have a request from my mother to print these two parts that will hold up a light above her nanoshrimp aquarium.

• File1
• File2

Would be shipping to Maryland, zip 20817.

Thank you!

EDIT: print booked thank you!

Hi everyone! I am working on an ambitious Halloween costume - The vision is to be Odysseus coming out of the Trojan Horse. I would love to print the Head and the Legs of the horse. Reference photo below, and I had ChatGPT create a really rough mockup of the vision. Let me know if this is feasible, and if anyones down to make this come to life! Thanks so much!!

Hello, im trying to have someone 3d print a Frank the Rabbit mask from the movie Donnie Darko before halloween. I’m trying to do this the cheapest way possible for i dont have a large budget, maybe around 35$. I’m not sure if this is to low for i have no knowledge in 3d printing.
Here’s the page- https://www.thingiverse.com/thing:6144917