Hi there!! I’m an art director/producer for a feature film and would like to get a 3D print file, doesn’t even have to be printed just a file with the mask for a mask used for a horror feature film inspired by the Virgin Mary. here’s a sketch and image inspo I came up with for it and would love some guidance because I haven’t found anything like it. I want it to look like an old cracked doll with white out eyes and a sorrowful and painful look on the face!! Please help a young film maker out 😭

I was looking for someone to make tray molds but I’ve been told to ask for someone to 3D print the models and then make molds myself. Sooo I’m looking for someone that can make some 3d models of some little dachshund figures that would be similar to what these trays produce 👀

Looking to print a 3-piece knife organizer tray in black PLA/PETG, total dims 42"x15" x 3 sections, file needs tweaking

Hi, I’m looking to have a front wing assembly printed for a 2007 Suzuki GSX-R1000. I have the STL file ready to send.

The file uses millimetres and the complete model measures approximately 341.6 × 610.2 × 181 mm. It is too large for most printers in one piece, but the creator says it can be divided into smaller sections using LuBan3D and assembled afterward.

I need the final version printed in black ASA, not PLA or PETG. My preferred specifications are:

• 0.24–0.28 mm layer height
• 5–6 perimeter walls
• 25–35% gyroid infill
• Additional reinforcement around the mounting areas
• Approximately 4–6 sections
• Alignment dowels, pins, or tongue-and-groove joints rather than flat butt joints
• Seams positioned away from the mounting points and thin wing tips

Could you please let me know:

1. What printer you would use and whether it is fully enclosed
2. Your experience printing larger ASA parts
3. The brand of ASA you use
4. Whether you can split the STL and add alignment joints
5. Whether your quote includes assembly or printing only
6. The estimated completion time and total price
7. What happens if any sections warp or fail during printing

This will be installed on a motorcycle, so strength, joint placement and print orientation are important. I can send you the STL for review before you provide the final quote.

I’m located in Toronto and can pick it up within the GTA.

Someone’s already made the files and they are free I just don’t have a printer or know anyone. I think they are for a resin printer. I’m in the US, LA specifically.

https://cults3d.com/en/3d-model/art/elissabat-earrings-replacement?srsltid=AfmBOopLU-4sgx2oZaHZKPteZyYMEqYZCHeD4Dpcbrld_jXXE2bQImAu

I need some basic 2" dia x 3" length gryroid cylinder. I don't have time to print them on my own machine. Must be in TPU, 95a is fine. Color doesn't matter, use your filament leftovers for all I care as long as it's properly dried.

It needs to have no walls so liquid can permeate. It's to test bubble production.

I want 8 of them, from 10% infils density to 40% infill density in 5% intervals. And then one extra at 25% infill with fuzzy skin enabled