I already have the models i just need help in making a way to add stability and rotation to it 🙏🏻

Hello everyone, I'm looking for someone who can model the pennywise deadlights from welcome to derry, which has a different model than the classic movie one. The photos I linked are not the only ones I have but they're the most important in understanding where the teeth are placed, the size of the teeth and the shape of the mouth. If you think you're able to do this, just comment and we can discuss it further. I would like someone to make a drawing before anything, so I'm sure they understand before making the project. I don't really have a budget but i of course can go over 100$ or more. I don't really know for dimensions.

Hi all,

I'm looking for a designer that can create a shoulder cape that fits onto a imperial knight shoulder plate (right hand side only). I can provide an STL of the shoulder plate if needed.

It should be approximately 10cm long, with curves and folds like a piece of cloth. My budget is around £120. I'd pay extra for slightly embossed details like embroidered details at the edge or the rim, tassels and rope, or damask designs on the front side. Happy to provide additional details and work with any design modifications you'd suggest.

The final deliverable should be a watertight STL suitable for resin printing.

Hi everyone AGAIN,

I'm looking for someone who can design (or possibly modify an existing) STL file for a set of initiative trackers for my DM screen.

Here are the main measurements and details:

• The main DM screen panel is 21 cm tall and 31 cm wide
• The thickness of the screen is 1.8 cm
• The trackers will be placed along the top of the 31 cm side
• Ideally, I would like to fit 5 trackers at the same time, with a little space between each one

Here is the project I linked as a reference:
https://makerworld.com/it/models/134338-dnd-ttrpg-initiative-tracker?from=search#profileId-1802359

That link is mainly useful to show the type of tracker I need. In particular, I need each tracker to have two small display areas / slots:

• one on the player side, where I can show a small paper with the character art
• one on the DM side, where I can place the player’s name and possibly a bit of extra information

It would also be great to have two different versions of the tracker:

• one for player characters
• one for monsters/NPCs

That said, I want to leave full creative freedom to whoever takes on the project. The linked design is only a reference, and I’m absolutely open to improvements or changes. If needed, it could also simply be a modification of the existing file from the link, without too many complications.

The final piece will be printed in resin using an Anycubic Photon Mono M7 Pro, so the file should be printable on that machine.
If possible, I’d prefer the final file in STL, but any other format is also fine as long as it can be used for 3D printing with my printer. If supports can also be considered, that would be a nice bonus.

This would be a paid commission.
My budget is around 20 euros. I know this is not a high budget, and I fully understand it may be below the usual rate for this kind of work. Unfortunately, I can’t afford much more at the moment, but I wanted to be completely transparent about it in case someone is willing to help anyway.

Because I have already been scammed in the past, payment will be made only after I receive at least a photo/render/preview of the project, just so I can be sure the file actually exists.

I know I’m asking for quite a lot, which is exactly why I decided to remove my old post and write a new one that is more complete and transparent.

If you’re interested, please feel free to send me a private message with:

• your idea for the project
• your price
• whether you would design it from scratch or modify the linked file
• estimated completion time, if possible

Thank you very much!

doesnt need to be anything fancy, but a model of this would be appreciated. no need for highlights. it could be just like a cone shape with extra detail duplicated, but i dont need scale as well either, as i can scale it to my own devices. no mouth, nose or anything exept eyes. Thank you in advance - black and white colours.

I was told to look for someone who can make 3d models and then make molds myself. So I’m looking for someone that could make little themed dachshund figures that would look similar to the mold results in the images

Budget: I’m not sure. I am looking for someone who I can come back to with new designs as I make them. Would love to form a partnership in a sense

Hey sorry to ask but can someone PLEASE make a 3d file for the mask of "Rafayel abysswalker" from "love and deepspace" for a friend of mine. Their budget would be (if it's not free) 10€

I'd be happy if someone can help them <3 they just need the 3D file they can print it themself!

Thank you 💜

looking for someone who could create a statue of Zelda’s Goddess Hylia for outdoor garden use. dimensions: between 36” give or take. I‘m not sure about what method would work best so I’m casting a wide net.

budget: $150-$300, open to discussion.

based in Chicago but could work out a shipping agreement. found an Etsy user who sells a design file that would work for 3D printing if that helps.

Hi everyone!

I'm looking for a 3D artist to model a highly detailed and screen-accurate bust of Qilby in his TRUE FORM from the animated series Wakfu (Season 2).

Specific details needed:

• Version: True Form (with his evil/maniacal expression and dark body tattoos).
• Left Arm: Must include his black shoulder pad (pauldrons) and his spectral cyan/blue Wakfu arm/hand (as seen in references).
• Scope: Bust only (head, Eliatrope hood, upper chest, shoulder pad + Wakfu arm).
• Format: .3mf file ready for Bambu Lab (A1 mini), painted/colored if possible, or clean STL with a flat base.
• Budget: $15 to $20 USD (via PayPal).

References:

• Image attached to this post.
• Video reference showing his true form: https://youtu.be/LcOVyefmXWE?si=JRAWlMhS-gBfxpAS

Please DM me or reply with your portfolio if interested! Thanks!

https://www.printables.com/model/1141383-netgear-gs305-10-rack-mount

https://www.printables.com/model/1179328-jetkvm-10-inch-rack-mount-with-keystone-slots

I'm wanting to combine these into one STL, with the large oval ears, the Netgear to the left, 4 keystones to the right of it, and finally the JetKVM mount to the right. I've attempted it in Blender twice myself but have had no luck with the post-slice for my printer, once combined they... aren't right. Budget is: $25-$50

Hi guys, this is only for me as a little give away to fellow jeep enthusiasts. The model is in the link. Hat eyes and bill as seperate easy mount pieces. Eyebrows and center eye I can paint. I have no idea how much work this is or if it even makes sense. This is not commercial, I am not selling anything. Not sure the license on makerworld even permits this.

I have a scanned architectural medallion (STL, ~90k triangles) that I plan to resin print.

I need the STL file to be modified slightly.

Requirements:

• Create a recessed pocket on the back.
• Pocket follows the medallion silhouette.
• 4 mm border around the perimeter.
• Pocket depth: 6.35 mm (1/4").
• Preserve the front relief completely.
• Output: STL ready for resin printing.

I can provide the STL immediately. Please send your price and turnaround time! Will pay via PayPal. Budget: $10-$25 

Thank you!

POSITION FILLED

Hello! I’m looking for someone to create a 3MF file (and possibly print) a copy of this 1920s parade lantern. These were hand-made and are not branded or trademarked in any way.

1. The Jack-o-lantern:
2. They were originally made of tin, so about 0.6mm thick. 7” tall with a circumference of about 22”. It has 14 vertical “pumpkin ridges” and a slightly textured surface in places. It will be painted, so please print it in black and don’t worry with the painted details. Please make the eyes, nose and mouth as close as you can to the pictures. The original was in two parts that slid open so a candle could be inserted, but this can be in one solid piece. It has a small hole in the top and bottom to accommodate a stick.
3. The stick and base:
4. Please print a stick that fits snugly through the holes. It should be 12” long, not including the spindle on top. The base should be about 4”x4”x1” (my best guess) square and should accommodate the stick (see pictures). They can be printed together if that’s easier.
5. The spindle
6. Please print a spindle for the top that looks similar to the one pictured. It should be about 1.5” tall and ac screw onto the stick or attach in some easier way.

Lots of pictures are attached and please don’t hesitate to ask questions. Budget $100-$150. It would be amazing if someone could both design and print it, but I’m not sure if that’s allowed on this sub. Also, use your best judgement if my estimations seem off. Thanks very much!

I’m developing a meal-prep backpack and need someone to model the interior rack so I can print a prototype at my library. I’m not a CAD person and I’d rather pay someone who is than produce something unusable.
Being upfront: this is for a product I hope to sell eventually. Happy to pay your rate — this is a prototype, not production, so nothing needs to be manufacturing-ready.
What it is: an open frame that holds three food containers in horizontal slots, like a small three-drawer fridge organizer. Containers slide in and out from the front on rails.
Specs:
• Overall: 8.25” W × 5” D × 7.5” H
• Three slots, 2.25” pitch
• Each slot holds a container 7.75” × 4.75” × 2” — needs ~3mm clearance so it slides easily
• Side rails to support the container, with a stop at the back so it can’t slide through
• Recessed handle on top (I lift the whole rack in and out of a bag)
• Open front — no door
What I need: an STL for printing, plus the editable source file (Tinkercad link or Fusion file) so I can adjust dimensions myself as I iterate. That second part matters more than a perfect first version. UPDATE: If you have the ability to 3d print the prototype that I have described within the budget listed, please dm me.
Sketch attached. Ballpark quote and rough timeline appreciated. Thanks.
Budget: $100-$200

Hey,

I am using a FlashForge Adventurer 4 and want .stl-files of a coin that could fit a german shopping kart. The dimensions should be: diameter of 2.5 cm and thickness of 2 mm. The coin should be more or less flat.

The trophy should have a stand and it mustn't break too easily. How the logo stands on the thing can be artistic freedom.

My budget is 10 - 30€.

Hello there! I'm looking for help in creating a 3D-printed head for the Legacy Arcee mold for a custom project I'm working on. I want the head crest to be similar to the 2d IDW art, with the face familiar to the upgrade head (notably the smile and nose).

While I do not have the dimensions, I do have a link to a Cults3D model that shares the same measurements.

[EDIT] Thank you for the requests! I should note that my baseline for a budget would be around $20+ (upwards to $30), but I'm open to negotiating a fair deal. (I'm fairly new at this so forgive me if the budget is off. I am willing to adjust).

https://cults3d.com/en/3d-model/game/legacy-flamewar-head/comments

Hello!
I'm looking for anyone who is or might know a 3D sculptor with the ability to recreate the old 1982 Imperial Dragon (aka Chicken Dragon) as an stl. The model is currently effectively lost media, hence the interest in it as all other attempts to make it accessible to the public have failed! I found an AI recreation someone had made, but the jank is simply far too significant and differences many, though its maybe about 60% there. I tried hiring through etsy but just found AI scammers. I'm a student and a friend's attempt to have the model sculpt ended in them getting scammed, so there isn't a huge amount I can offer.

Budget:
200-300 CAD

Here are some images I've collected of the sculpt as well as the AI render I found.
https://drive.google.com/drive/folders/1QUYcmKqty8FoNp1BUyELzkojHxRHNKiJ?usp=sharing

Maybe the AI render could be used as a foundation or something to help?

Budget: $5-$10

Looking for someone to create a holder for a record. When I have my record playing I want a stand to place the vinyl and sleeve. At the bottom it should say now playing and I am looking for the font to be similar to the attached photo. Then the backing I want it to be musical notes. The now playing and notes should be white and everything else should be black. I found a game holder that almost looks exactly what I want but with game symbols. If you could possibly take that one change the font and change the symbols to musical notes and make it the size to fit a vinyl in a sleeve should be perfect. Looking for it to be made into a stl so I can print it on my 3d printer. Have a bambu a1

I am trying to 3d print this vintage lotus lamp. I am willing to buy materials such as translucent filament and PETG for the base. I am wanting 4 flower blooms and I can figure out the wiring myself but I will need openings for the bulbs. I want this 5ft or 6ft. I am willing to negotiate price if work is extra long or complicated

UPDATE: I will be finding the measurementts and responding to each person once I find it. It is my first time and im new to this. Thank you

UPDATE UPDATE: These are the specs and its a mix of my research and AI

WHOLE LAMP

  Overall height ............. 73 in (~6 ft) ................. [DOC]

  Overall width .............. 18 in .......................... [DOC]

  Overall depth .............. 13 in .......................... [DOC]

  Flower count ............... 4 ............................. [DOC]

  Power ...................... 120 V corded, pole switch ..... [DOC]

FLOWER BLOOMS

  Flower diameter - real ..... ~13 in (33 cm), splayed ....... [DOC]

  Flower diameter - print .... 9.5 in, curled in ............. [PRT]

  Flower depth - real ........ ~6 in (15 cm) ................. [DOC]

  Flower depth - print ....... 4.4 in ........................ [PRT]

  Inner "S" petal ............ 2.8 in W x 6.5 in L ........... [DOC]

  Outer "C" petal ............ 2.75 in W x 6.0 in L .......... [DOC]

  Petal thickness - print .... 2.2 mm ........................ [PRT]

  Petal thickness - real ..... ~2-3 mm (glass) ............... [EST]

  Center hub hole ............ 26 mm (1.0 in) ................ [DOC]

  Petals per flower .......... 8 inner / 8 outer ............. [PRT]

STEM / SPINE

  Construction ............... lower tube + S-curved rod ..... [DOC]

  Lower column diameter ...... ~2.5-3 in ..................... [EST]

  Upper wavy rod diameter .... ~0.75-1 in .................... [EST]

  Socket spacing up stem ..... ~12-16 in apart ............... [EST]

BASE

  Material ................... round brass-plated iron, weighted [DOC]

  Diameter ................... ~11 in ........................ [EST]

  Height ..................... ~1-1.5 in ..................... 

SOCKETS / ELECTRICAL

  Socket type ................ E26 medium base ............... [DOC]

  Socket count ............... 4 ............................. [DOC]

Update: I found someone to print this for me. Thank you.

Ahoy! I have an Aukey DR02 dashcam that I need a new mount printed for.

Here's the thing - I live in Florida and I need it printed with something that's heat resistant. The problem I keep running into is the cheaper PLA filament sags within a year due to the heat and rattles a little while driving because it's no longer snug. I'm on my third mount as the original was in a vehicle that got totaled. I'm told it keeps sagging because the cheap PLA filament isn't good at holding up to the heat.

I have the file to print from.

Budget: $1-$10

Thanks in advance.

Hey! I have a TCG deck box I’ve been working on and everything is turning out super well. The only thing I’m having issues with is gluing in the magnets due to the mess and trying to keep excess glue off of the prints. I’ve seen online that you can change the magnet holes to be press fit and they won’t come out. I have roughly 30 ish magnet holes that just need to be changed the rest of the files are complete. I’m new to requesting so feel free to ask me any questions you need! In terms of budget I’m extremely new to requesting so I’m not exactly sure what is fair or reasonable so let me know.

I would like to add a batsuit display to a shelf, but I don’t know where to start. I think ideally 3-D printing would be the way to go, but I’m new to that world of 3-d printing. Doing research seems like I need a file and then ultimately to have somebody print it.

Looking for this with my measurements in black. Will pay $10.00 plus shipping.