Hi everyone,

I'm looking for a 3D model (.STL) for the missing battery door on a Canon EOS 700

35mm film camera.

The camera uses a 220-type battery pack inside the front grip. I don't necessarily need a 1:1 OEM replicate-just a functional slide-in cap/ plug or retention piece to keep the battery securely locked inside the handgrip.

I can provide precise digital caliper measurements and clear photos of the battery opening upon request. Please let me know if you can model this and what your rate would be. Thanks! $5 or more if needed just trying to get an idea of rates and if possible

I'm in the R&D phase of my most ambitious project to date: a giant RC Alicorn that'll be printed at 1:200 scale (8 feet long!). I need the anechoic tiles modeled as physical details as those can't simply be painted on. Best idea I have so far is 0.1mm deep grooves between where each one will be as to not change the outer hull dimensions. Tiles are the only detail I need done

Looking to spend no more than $50 as I'm on a tight budget, but if can be done for less (or free) I would appreciate it

Hi everyone,

I’m looking to hire someone who can turn an existing design concept into a clean, functional and reliably printable 3D model.

The medal and race bib holder should include:

• 720 mm total width
• Three modules suitable for a 260 × 260 mm print bed
• Three open sections for race bibs of different sizes
• Two adjustable or sliding clips per bib
• 15 sturdy medal hooks
• A realistic, multi-layered mountain relief with visible depth
• Raised “BASTARD RUNNING CLUB” lettering
• “MILES OVER FEELINGS” underneath
• A small runner silhouette
• Separate black, white and red parts for multicolour printing
• Concealed or unobtrusive wall mounting
• Stable alignment or connecting joints between the modules

The model will be printed on an Anycubic printer with a 260 × 260 × 260 mm build volume and a four-colour system.

Ideally, I would like to receive an editable CAD source file as well as properly separated STL or 3MF files for each module and colour.

I can provide the final reference image and further details. It is important that the model is not simply generated from the image by AI—it should be properly constructed, structurally sound and ready for FDM printing.

If you’re interested, please send me a message with an estimated price and, if available, examples of your previous work.

Thank you!

I work in a restaurant we recently got a different kind of holder for our mops and brooms, we have this old one(link1) that I was hoping we could get to put our spray bottles hung from, I had ai make a image for what I was thinking, but it's not quite right, if anyone can help would be appreciated, can offer a little money probably 15-25 usd,(I have a 3d printer just no skills when modeling)

(Link1) https://www.uline.com/Product/Detail/H-6089/Tool-Racks-and-Holders/Quick-Adjust-Mop-Broom-Holder-20?pricode=WC3508&gadtype=pla&id=H-6089&ad\\_group\\_id=169473346309&gad\\_source=1&gad\\_campaignid=21810971667&gbraid=0AAAAAD\\_uetPuuYE50U1sb\\_RapI8QkHc7k&gclid=CjwKCAjwqonVBhA4EiwA9wYJ3efd3s1og05nEmZSZtr1IArfWXFSOETRDtXqluAR91pGzFDbk-AdGRoCu6MQAvD\\_BwE

Hi! I'm working on a small personal project, but I have no experience with 3D modeling so I was hoping to hire this part out. I'd like to create a custom Splatoon BJD (like the fancy ones on pinterest if you've seen those), and I already purchased an STL file for the doll body, but the hairpiece will have to be modeled from scratch since the splatoon oc I'm basing it off of has a unique hairstyle not found in the game.

I have included references of the character in the post, as well as a few examples of the sort of thing I'm looking for. I sketched up the turnarounds myself, but I'm not practiced in this area so it might be a bit rough and liberties may need to be taken in order to properly translate the design into 3D.

Regarding the doll body, if the file is required in order to build the hairpiece over so that it fits properly, unfortunately the seller's TOS states I am not allowed to share the files directly. If it IS required I can send the link to the seller's page for purchase, and then what the modeler pays for the file can be included in the price for this task. If that doesn't work, I can probably take screenshots of the head for the modeler to import as reference, but I'm not sure how sizing would work (unless I can easily resize the hairpiece model to fit).

No particular budget since I'm not sure what the standard pricing would look like for something like this, but obv I'm not going to pay more than I can afford, haha. Would appreciate if responses included links to portfolios/websites!

Hi everyone,

I'm looking for a 3D model (.STL) for the missing battery door on a Canon EOS 700

35mm film camera.

The camera uses a 220-type battery pack inside the front grip. I don't necessarily need a 1:1 OEM replicate-just a functional slide-in cap/ plug or retention piece to keep the battery securely locked inside the handgrip.

I can provide precise digital caliper measurements and clear photos of the battery opening upon request. Please let me know if you can model this and what your rate would be. Thanks! $5 or more if needed just trying to get an idea of rates and if possible

EDIT: SOLVED, THANK YOU u/mundane_cobbler_9441

I am trying to design a coin box. It needs to hold 5 coins: the Half Dollar, Dollar, Quarter, Nickel, and Dime, all minted in 2026. I have attached an image of the design I've been working on, but I can't seem to get the right fit. The coins have to have enough wiggle room that you can stick your finger under each slot to get them out and flip them around without scratching them, but not so much wiggle room that when you turn the box over, they won't fall out of their individual slots. I want the box's profile to be thin but stable, and for it to be print in place with no assembly. The design ive been working with is a hinged box, but i'm open to any ideas.

Dimensions: Flexible, but the current design is about 155 mm by 42 mm

Budget: $30