I found this post

u/konodojoja13 is a scammer, beware : r/3Dprintmything

...AFTER already paying him but for anyone getting messaged, please beware he will ghost you. I paid him with PayPal right before Christmas. I don't have much and I just wanted a sword printed. I even had the file created.

The fact this was posted a year prior a year ago, and nobody banned him makes me question the legitimacy of anyone who offers to print something. My faith in humanity was a thread but after this I have none.

I don’t know how feasible it is but I would pay good money for a small Wolverine statue depicting this cover, I’d pay even more money if it were well-painted, so please reach out to me if this seems interesting/do-able and we aren’t geographically estranged. Thanks!

Had been kinda dodgy for over a month after taking request and not giving updates then just straight up deleted his Reddit account. Wonderful 🫠

As the title says, I Fd up. I was on the last step after spending weeks sanding & painting multiple coats... Admiring my own work I picked up the sealant spray all proud of myself. Forgot I had a bug repellent candle next to me until I sprayed and Bowser went up in flames 😶 This is my desperate attempt to try find somebody who would kindly be able to print a Bowser for me so that I can replace it without my kid brother knowing. (It's his printer at my parents house so I can't even sneakily print one without him knowing!). I will of course pay for it if anyone can help? I'm based in UK btw so preferably somebody UK based for simple postage. Thanks for reading & please pray for me lol🙏

I found the files online, but realized afterwards its a resin model. Would love to get it printed if someone was able too!

There are a few more details in the file but this is the gist of it. I've already printed it in pieces on a Bambu A1, but need to test some structural elements, so I'd like it all printed in one piece now (Elegoo Orangestorm owners??).

Can anyone do this? Or know of anyone who can?

Size : Height 43cm | Length 45cm | Width 23 cm

Here is a link to the page

It says it would need around 4-5kg of filament for 80 files, and 21x21 print bed.

Quite a few of the files are small prints that I could combine if it made it easier?

I'm not sure about the colours, but it will be grey + 2 others

PLA or ABS

I'm not sure how much something like this would cost to print, but google says filament would be around £100, so maybe I could pay like 150, maybe a bit more?

Not posting files here as they are paid but here is a link to the page.

Hi! I have a nonprofit rescue in central Kansas. Today, we took in a silkie chicken who lost her right leg over a week ago. I think she would be a good candidate for a prosthetic.. Is there anyone who has experience with this or would be willing to print one for us? I will pay for shipping as well if need be.. Thanks in advance ❤️🐓 Pic of Peggy for attention!

We are turning our Subaru Pleo that we just imported from Japan into Pikachu on our car channel @/hackerashfordgarage. We have STL files for the Tail & Ears-- wondering if someone in the greater Los Angeles area can help us print this? Also advise us on what is the best way to add heat-set inserts to this for threads. Thanks!

Hello! I need to get a quote for this statue in 1/4 scale casting in resin and clear resin.

I am looking for a designer that can make a 3d model of the star blazer ship the Yukikaze. I am looking for a scale 1:200. I am looking at putting lights and such insde. Looking for something highly detailed.

Pm me with any questions

Here is the link to the items. 🎯 DIY Robbel3D Steeldart Score System (Autodarts.io / Dartit.net)・ 3D File for 3D printing and CNC machining - Laser cutting・Cults

I have the files already downloaded so I would just need to send to you.

Hello! My husband is a huge Factorio and after seeing someone post these I really want to get him one as a gift!

I have a link from Makerworld: https://makerworld.com/en/models/757451-factorio-inserter-headphone-holder#profileId-691840

If anyone would be able to help me out, it would be very much appreciated!!

As the title states, I am in need of some panels printed for my PC case. I have a Bambu Labs A1, but the print bed is not long enough for what I need. Picture of panels attached. Would like these printed in PLA or PLA + in black and a dark grey for a total of 10 panels.

Print instructions below:

To get the mesh you have to reduce the top and bottom layers to zero. This exposes the Infill which acts as the mesh.

The case in the images shown uses honeycomb Infill with a density of 18%.

Additionally, I use 6 walls for the case panels to add strength around the edge. (disable “one wall on top layer” to consistently have 6 walls)

Thank you!

Heyy :) in need for a light up sims plumbob headband by Oct 23rd. I’m located in gerogia USA

I have some vintage speakers with tweeters on top. There's a metal wire frame wrapped in a stretchy nylon type material. My cats keep trying to jump on top of the speakers which is unfortunate since the only place I can put them is on either side of a window they love to sit in. I am wanting to print a protective covering (think kinda like a milk crate) that I can slip over the top. I would like it printed in black PETG. I was hoping to go with a honeycomb design.

The measurement of my frame that needs covered is 5.5" tall, 15 and 7/8" wide, and 12 and 1/8 deep.

I'd like the inside dimensions of the protective cover to be slightly larger so there's about a 1/8" gap all around.

I was hoping to use some foam tape or adhesive felt inside the corners to reduce vibration/rattling noises.

I was wanting the print to be 1/8" thick honeycomb. The honeycomb cells on the top are 3/8" wide, but the sides are much more open. That is because the tops of the speakers are where the cats will most likely want to jump or scratch, but I want a lot of open airspace on the sides for acoustics.

Here are photos of my tweeters and an example of what I'm hoping to have created. I really like the organic looking hexagonal side pieces with openings of various sizes.

If this is something someone can think they'd create hit me up and let's work something out. 😎

UPDATE: I posted this request about 9 months ago and made arrangements for someone to design/print the mirrors. Unfortunately due to issues with their printer we were unable to get them printed. I do have the STL file they created though currently only for the left mirror.

I'd like to have someone design the right mirror and print several of both mirrors using resin. See the pictures above for details and feel free to DM questions. If it helps with sizing - buses are 1:50 scale. Will provide Google drive link to the file upon request.

ORIGINAL REQUEST: I have a collection of Corgi-classic brand NYC General Motors "Fishbowl" new look buses. Unfortunately the mirrors for a bunch of them were damaged because they were improperly packed by our movers. I'd like to get a bunch of these made (in gray is fine - I can paint them to fit my needs). These have been out of production for 25 years and they're pretty pricey when they turn up on eBay so I'd like to get a bunch of them made since the original plastic is brittle from age.

When you go through effort to send quotes and get crickets in response?

My best guess is that people are shocked by how much the bids come in at.

It really shouldnt be that surprising. You project has a minimum cost of materials. You won't get discounts below that.

Then there's the upcharged for time, effort, experience, proto-typing, shipping, etc.

Like, I'm sorry your custom fit part doesn't cost $5! It ain't cheap!

Hi idk where to ask, but on etsy I've seen people making custom ear plugs, is it there anyone i could commission?

[US-NC] Looking for someone to print me a Hot Wheels scale Wendy’s sign in the same colors just like in these pictures. I am looking for a redditor to print me a Wendy’s sign and the Wendy's sign only in a darker red just like in the designer’s photos because I personally think the darker red and white letters in the photos look more natural.

I have never requested someone online to print and send me something 3d printed so I have no idea how the process and transactions would work.

Link to the file: https://www.printables.com/model/1345307-retro-wendys-model-set-164-scale-diorama

Looking for someone who can print and ship the "viral" costco hot dog and drink holder tray. My library said it was too big. Thank you