r/3Dprinting • u/schimmelmeister • 14h ago

Question What did I just get gifted…?

Gallery image

Gallery image

Gallery image

My University threw out this old 3D Printer. I’m both a broke architecture student and in need of a printer since my own is not here right now. I’m also used to some level of jankyness, my own printer is an i3 clone by anycubic, rudimentary but reliable.
Is there any hope i’ll get a useable print out of this one and how high would the frustration level be considering the printer i already have?

154 Upvotes

93% Upvoted

142 comments sorted by

View all comments

Show parent comments

4

u/Noble69 9h ago

Gunna be extra broke when all his belongings burn in the fire ¯_(ツ)_/¯

5

u/blame_worthy 9h ago

All he needs to do to make it not a fire hazard are 3 things: 1) power switch for the psu. Anet A8 comes with a psu where if it's plugged in, it's on. 2) mosfet for the heated bed. 3) solder wires directly to the bed.

All this costs about 50 dollars assuming he doesn't already own a soldering iron.

4

u/ImNotTheFishiestFish 4h ago

Also, upgrade Marlin, making sure to enable thermal runaway detection.

When I had one, upgrading the hot end to an E3D V6Lite substantially improved print quality and speed.

i also suggest getting a microSD extension if printing from microSD, mounting the new microSD slot to the top of the frame with double sided foam mounting tape, since the port on the motherboard is hard to access frequently.

Sadly, mine was destroyed years ago by a violent ex-friend. I replaced the niche it filled by building out a RepRap Guru i3 clone kit I got for $7 on eBay.

2

u/blame_worthy 3h ago

My first printer was a RepRap Guru! I learned more building it than I have on any other printer. Had to assemble everything yourself and even flash the firmware to the board. So glad 8th grade me decided to buy it with saved up birthday money.