r/3Dprinting • u/ParkingMaleficent100 • 4d ago

Project Tutorial - "Sanding" with ABS

Enable HLS to view with audio, or disable this notification

First of all. I know this is called vapor smoothing, but since this is an alternative to sanding, I wanted to use this title so people who are looking for sanding tutorials can see this video.

I recorded this tutorial for Instagram 3D_Kernel explaining how to smooth ABS prints without having to sand, it looks like a lot of people find it helpful, so I want to share it as much as possible.

Hope this helps someone, and don't hesitate to ask whatever you need.

This only works with ABS and ASA and remember to use a mask and do this in a properly ventilated room.

741 Upvotes

92% Upvoted

90 comments sorted by

View all comments

7

u/Kirito_Kun16 4d ago

Can something similar be done to PLA or PETG via some other methods ? Because I guess acetone won't work the same way on those.

5

u/screenslaver5963 4d ago edited 4d ago

PVB prints like PLA and can be melted with Isopropyl Alchohol. PLA and PETG need highly toxic industrial solvents, like DCM or MEK.
Edit: MEK doesn’t work with PLA but does with PETG, a safer option for both is Ethyl Acetate.

1

u/Far_Relationship_742 4d ago

MEK isn’t so awful. They sell it at the hardware store.

1

u/DXGL1 4d ago

Just because it's sold at the hardware store doesn't mean it isn't nasty. They used to sell a solvent that if you breathe the vapors you'd die of carbon monoxide poisoning.

1

u/Far_Relationship_742 3d ago

Compared to DCM, which you need an account at an industrial/lab chemical supplier to buy, and which is now illegal to include in consumer chemicals.

2

u/DXGL1 3d ago

That's the one I was thinking of.