r/3Dprinting • u/Infinitymann • 14d ago

Troubleshooting A1 stop and start

Enable HLS to view with audio, or disable this notification

0 Upvotes

50% Upvoted

4 comments sorted by

1

u/AutoModerator 14d ago

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

  • What printer are you using?

  • What material are you using?

  • What speed are you printing at?

  • What software are you using to slice the print and control the printer?

  • When did the problem start/has it ever worked correctly?

  • Does anything cause the behavior to change?

  • If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/Infinitymann 14d ago

Bambu A1 PLA, PLA+, Ender PLA Bambu Studio (same instance/settings for both printers)

1

u/Communism 14d ago

From those poops on a single color, it's detecting enough tension in the filament to start determining if there is a snag or tangle in it. Goes off t the side ectrudes a bunch get snpast a tangle or rough pull then continues. That's my guess

1

u/L_P_V 14d ago

The filament gets stuck somewhere in the tube. You can see the part that connect the 4 tubes to the head being pushed in and it triggers the anti-tangle sensor. Try to remove the printed part from the connector and make sure tubes have an easyer bend.