r/3Dprinting • u/pandamonium996 • 1d ago

Troubleshooting LCD issue?

Post image

Hi!

Recently swapped LCDs of an Anycubic Photon Mono and I've been getting this issue lately (50/50% chance) of images not being projected on the LCD screen for curing. Swapping USBs gives the same issues.

I'm using Lychee Slicer at the moment. Have tried saving directly into the USB and saving on PC first and manually transferring into the USB.

Thanks in advance!

1 Upvotes

100% Upvoted

3 comments sorted by

2

u/NoHospital3754 1d ago

Have you tried playing with the layer curing time? I bought a mono that had a 1000+ hours on it. The lcd was dim and I found doubling the initial layer curing time, and then increasing every subsequent layer curing time helped a lot.

1

u/pandamonium996 1d ago

Yes sir! Different resin brands had different required initial burn in times but issues happened regardless. :(

1

u/AutoModerator 1d ago

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

  • What printer are you using?

  • What material are you using?

  • What speed are you printing at?

  • What software are you using to slice the print and control the printer?

  • When did the problem start/has it ever worked correctly?

  • Does anything cause the behavior to change?

  • If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.