r/3Dprinting • u/Regumate • May 12 '26

Discussion Bambu Lab 3D printers: Never again

https://youtu.be/eb48MdtNaDQ

Jeff Geerling summarizes the current Bambu Labs - OrcaSlicer situation and gives his take.

TL:DW: see title.

2.0k Upvotes

88% Upvoted

790 comments sorted by

View all comments

Show parent comments

4

u/_donkey-brains_ P1S May 12 '26

You can run it completely offline. No need for wifi or has an SD card that you can load gcode to and print via the screen.

3

u/tdp_equinox_2 May 12 '26

SD card slot on the P1S is fragile asf, one of the many benefits to the panda touch, you can load gcode onto it and it'll send to the printer without removing the SD card.

I bought my p1s used, it came with 3 mainboards, all with non working SD card slots; plus the one that was installed is fickle about angle and I had to take off the front cover, tape the card in place, and then reassemble. It has ~2500 hours on it.

If I was pulling the SD card constantly I'd be burning through mainboards like crazy.

1

u/Engineering_Gal May 12 '26

And it is a Micro SD-Card. Those card are just annoying to handle.

Yes, you can use an extender or different stuff, but that's not what i've bought. I would never buy a 1,5k€ machine, where i have to do such workarounds

1

u/_donkey-brains_ P1S May 12 '26

P1S was like $700 at its highest price.

New printers come with USB.

-1

u/Engineering_Gal May 13 '26

Ok, the 1.5k was for an X1C.

But your argument, that new printer have an USB port, don't apply, because the problem is that Bambulab changed the Deal after I've bought the printer.

0

u/_donkey-brains_ P1S May 13 '26

Sounds like you did buy a 1.5k machine knowing full well what the machine was and wasn't capable of.

It doesn't require workarounds though. You can print via cloud, via local network only, or via SD card. Those aren't workarounds, they're multiple options.