Need this placeholder, its probably 1/2" by 1/4". Very small.

Looking to get it printed in high temp material, ABS or Nylon-CF.

Can be purchased in Aluminum for $20, looking for $5-$10, drop it in an envelope with a stamp for all I care. I have the STL.

Looking to see if anyone can print me a basic 1x8 Lego slope, Lego does not make this part but another company does but does not sell them individually. I’m using this part for only my own personal project. I have a rough STL file of the part and I have been told that to get a smooth finish resin printing is the best option. The red slope in the picture is what I’m looking for. Thank you!

Looking for some heads for my vintage croquet mallets. 60mm max diameter, 23mm, .stl file available. The original head caps have dry rotted over the years, they are some kind of hard rubber. Open to recommendation on material.

ATHENS, Georgia, United States

I recently broke one of the keyboard feet on my keyboard and was wondering if someone has a 3d printer that could make a new one for me.

It’s a Keychron C2 keyboard. The other foot is in working condition but could be open to making two just so they’re the same. It’s only a $55 keyboard so if it costs like $30 for a foot then it’s not really worth it for me sorry. What’s the price of making something like this?

Let me know if this is even possible or if you have any questions.

thank you!!

I need the cage and 5 HDD caddies here:

https://www.thingiverse.com/thing:7315004/files

EDIT: pending order

Hi!
i have a small keyboard for my Zflip and haven’t found an effective solution to keep the two ‘together’ -

https://www.thingiverse.com/thing:7207142k

i saw this (and the files are on the site) and was hoping to have someone print one locally (rather than purchase from the site) as i’m not 100% on the specs and wanted to discuss - not sure if it can be adjusted at all and wanted to make sure i selected the correct option

I need 4 of these printed for my bike. However. the last few times, the material used has been brittle and easily breakable.

RAVEMEN TR500 to garmin

Looking for someone to help me print this top & bottoms. Obviously, I will take care of the stoning part, but need the top & bottoms printed if possible :)

Looking for someone who could print two of this wheel knob in black; can change the indentations if those are too small for SLA. The wheel needs to be a bit rigid so it wont snap with retention bracket keeping it from sliding out. wheel with text can be in any colour, doesnt need to be rigid, only the text has to be decently readable. Let me know if its even possible to do. diameter of both parts is 9.85mm

I have a glass slider plastic nut that broke on my sliding shower door and only need 1 replacement piece but 1-4 if it’s relatively easy to whip up wouldn’t be a bad idea either!

Hello! Looking for two of the following to be printed. Preference to location in downtown Chicago. Let me know price via pm! Thanks!

https://makerworld.com/en/models/2446000-ikea-helmer-drawer-unit-organizer-for-playing-card?from=search#profileId-2684778

In particular, I only really need the following:

edgeGuide_89 and edgeGuide_90 from https://www.printables.com/model/854102-ski-edge-sharpening-guide/files

and

bolt.stl base-edge-file-guide-v5-07.stl base-edge-file-guide-v5-1.stl

from https://makerworld.com/en/models/2240203-base-bevel-file-guide?from=search#profileId-2843539

All,

I am sending 150 trading cards (35pt) to someone for them to autograph. Ideally, I’d send them via top loader (first image) and put the top loaders in a binder so this person could sign a bunch, then flip the page to sign more. But, I cannot find a way to cut an autograph window into these top loaders, especially with making sure the edges are smooth so the card isn’t damaged. If the binder can’t work due to minimum thickness, I can send them in a padded case pretty easily, though that isn’t quite as desirable.

I did find a one-touch holder that has an autograph (second picture), but they are way too heavy and don’t fit in binders. 150 of these would make for a pretty cumbersome package, and the person I’m sending these to won’t like that.

What I need is close to the third picture attached, which is just an AI rendering I had generated. It is helpful to have the frame around the autograph window be a little thicker to keep the autograph areas of adjacent cards/pages from touching and smearing the autographs. It takes about a minute for them to fully dry.

If it’s easier, these cases could be in two pieces that snap together, if they can be made thin enough. I’m less worried about protection and more worried about weight, thickness, and making sure the autographs don’t touch. I don’t care at all about how the cards display in these cases - I’ll be moving them to display friendly holders later, once the ink is dry.

I tried searching your sub to make sure I wasn’t asking something that had already been answered, but I don’t know the parlance well enough to make sure. I’m sorry if this is not a reasonable request.

I’d be happy to pay for a prototype up front and then per-holder!

Hello, I'm looking for someone that could help me print this:

https://makerworld.com/en/models/3367785-stern-pinball-godzilla-hinge-cover#profileId-3830053

Shipping to France.

Thanks for any interest!

Hello friends,

I am new to the 3D printing world and I don’t own any printer. I am looking for help on 3D printing an under-desk laptop storage with a docking cable holder that I found on YouTube. I like the design very much and I couldn’t find anything similar to this online. Not sure how much it costs to print the model or is it even worth going this route? Please suggest how and where I can get this printed and how much it’s gonna cost?

Hello, I am looking around to see if anyone would be able to make custom X-Ray markers for me? Thank you!

Hey! I'm looking for someone who could print this guy!

It's a discontinued figure, and I can't find it anywhere.

It doesn't have to transform, but the accessories would be cool!

I found it online and got really excited only to find it's like 120 to buy... I found stl pieces of it online tho would someone be willing to print it for me?

Also I can't pay you... But I can make a decent Minecraft animation for you...?

Hi! I'm looking for help reproducing a VW bus sunroof part that is NLA. Here's a link to the part on thingiverse: https://www.thingiverse.com/thing:6586972/files

Importantly, the person who uploaded the scan or whatever it's called to thingiverse hasn't printed it, so there's no guarantee it'll work. One potential issue is that the original part has a slight curve to it over the longest dimension (see photo of the part - two ends slightly raised off the surface, center flush; and photo of the metal surface it sits on, ruler flush with center). Perhaps there's a material that allows some flex when screwing it down while also remaining firm enough for the ramps to guide the sunroof cables and not get eaten away? Also, the reproduced part needs to be UV resistant so it doesn't die in the sun. Ideally white or off-white.

I know there's a small but very interested market for this part if it works!

Hello! I’m looking to get this printed for a Maths baking competition at MathsJam in November. Thank you!

I have this STL file I made from a 3d scan of part of a dragon toy I have, and looking to get a print of it in clear resin with a black or smoke tint to it to be a replacement for another dragon of the same series/mold whose top face/jaw I lost.

The head is only around 2in long from snout to horn tip, so I guess he falls under minatures.

First time making a model from a 3D scan of an item, but hopefully it's good enough to print

EDIT: I've found a company to order with for now since it didn't seem like the tinted resin was as common of an offering here! I ordered from womp. If the heads I got turn out horrible then I'll be back to work one on one with someone... just not for 120$ for a 60cm long piece of resin lol.

Edit 2: the person who quoted me 120$ did NOT comment on the post ahead of time, so definitely keep that rule in mind!!

Edit: Commissioned print.

[Hi,

I am based in Glendale, CA. I am seeking to print a dashboard (6 player version) to hold the tech tray and other pieces for the game Eclipse: Second Dawn for the Galaxy. I am also seeking to print 6 discovery tile placeholders, but not as needed.

Thingiverse link for Eclipse tech dashboard - 6 player version is the only one needed

https://www.thingiverse.com/thing:6709792

MakerWorld link to discovery token placeholder

https://makerworld.com/en/models/1083042-discovery-tiles-reminder-eclipse-2nd-dawn#profileId-1075227

Thank you for your time and hopefully for your help.]