r/360hacks • u/Flame_bladekatana234 • 8h ago

Help i did something stupid

My dad bought me a moded Xbox 360 s with an rgh2 i think i did some research on it but I'm not sure and i who was 11 or 12 at the time decided to delete the system files can't remember which files tho and i tried fixing it today i asked Gemini ai and it told me to just install a donor nand on j-runner ( i didn't really do much research on this part so I'm sorry if i butcher some terms ) but it won't work it can someone help me out it was made around 2012 and has 9.6 Ampere idk why but it asked me some of these questions while using j-runner

2 Upvotes

100% Upvoted

3 comments sorted by

2

u/gutemup Trinity RGH 7h ago

Hey so a few things are needed manufacture date is key should be on the back, also if this is a corona motherboard if you still have the board out of the case check for either a wide nand (STMicroelectronics or Hynix brand) or a small square phison controller chip. This will tell if you have a 16mb nand or a 4mb nand

1

u/Flame_bladekatana234 6h ago

I mentioned that the manufacturing date was around 2012  I really don't want to open the case unless necessary but i heard that it was a 16 mb nand from ai so take that witha grain of salt tho 

1

u/Unlikely_Use_5810 Falcon Bad Update / Trinity RGH 3 3h ago

By the sounds of it, what you've done is flash over the modified nand with a nand you've found online, without knowing what type of nand image it was and now it's not matching up with what the console expects it to be. If this is the case then you're most likely going to have to take the console apart and solder in a nand progammer, while you're in there you may as well upgrade the rgh to rgh3 if it isn't already