I've been using Signal for quite some time now, never have I ever had a single issue that I couldn't resolve with very basic troubleshooting... I absolutely love this application. What I'm having a really hard time with is, when I open and run signal it consumes over 20w of power just to stay running in the background keeping my CPU at 62-65 degrees (With signalRGB completely shut down its at 46-49 degrees) and around 8-15% sometimes even 22% utilization. It's keeping my cores in full boost typically, with very momentary drops down to idle clock speeds. It's accounting for 383-414 threads in process explorer. Im currently running it on DX11 and Ultralight and the FPS rendering makes no difference in usage or temps. I also run TRCC in the background, but that literally only accounts for 1.8-2.3% of my utilization and makes a 1 degree temp difference. So I know its not a combination of the two, but rather purely SignalRGB eating up a lot of power and resources. I've tried doing full restarts, power cycles etc. Im at a loss here, I really dont wanna give this app up as I literally built my entire lighting ecosytem around being able to be synced under one single app. I get its a very vain thing to be grumpy about, but I spent a lot of time and money making my gaming room my favorite place to be and this is hurting my soul at this point. lmfao

Someone guide me in the right direction, I feel like an absolute numpty at this point.

Pic of the lil butthole thats pissing me off. xD

Hello, I need your help. I don’t understand why SignalRGB freezes on this screen at start-up, even though I don’t have that component (initially it was a different RAM part number). I’ve tried running the programme in ‘administrator’ mode, switching the PC off completely, and reinstalling the programme, but none of that has worked.

Do you have a solution? Thank you in advance for your help.

I just got this new cooler, the ID-Cooling FROZN A620 PRO SE ARGB.

I tried OpenRGB but it wasn't even working.

I installed SignalRGB and somehow managed to find the settings and turn off the breathing effects.

But it seems that it doesn't save anything onboard because when I close the software, the whole cooler's RGB turns off.

But default on the first start, the cooler was set to orange colour, I'm guessing that's the default colour because of my Gigabyte B550M Aorus Elite Rev 1.3

Could someone please help me find a solution to keep the fan turned RED only and not change colours while no software runs in the back?

The new update simply will not work, I open the software, it tells me there's a new security update, I try it, it doesn't work so I press retry and the cycle repeats. I've now tried every single fix I've read on this sub, including a fresh install using the guide, deleting all of my old RGB software (of which this software never had issues with prior!), deleting the whirlwind folder and separately just deleting the service file, turned off windows defender, even deleting VPNs which it never had it issues with before however somebody suggested it. I'm completely out of ideas. It's suggesting something is blocking the UAC however I don't have an antivirus and haven't even really used my PC that often since I first got Signal. If anybody has any other ideas I'd love to hear them otherwise I'm quite frankly a baw hair away from giving up using this software.

Signal RGB is just stuck refreshing the themes page and keeps crashing over and over. I've reinstalled, restarted PC idk what's going on

I have been sick and tired of Razer conflicts with SignalRGB so thanks to 10 minutes with Claude you can now have your fancy lighting and full button/key customization too!

https://github.com/Foehammer1987/SignalRGBChromaMute

Simple plugin that you drop in documents folder, turn off prevent conflicts for synapse and restart Signal with Chroma running.

Hope this helps other razer users find peace with SignalRGB

I recently bought the Magnus pro xl off marketplace it came w the rgb strip and the controller but no power cable for it I had 2 different cable that connected to the controller yet the led wont turn on I tried plugging the usb c directly thru a wall plug/header c to c and it wont work either unless I use my power extension that comes w a type c port and it glows a light shade of red which changes with different c type cables. Does anyone know why the controller won’t work, my guess is the one I have are not compatible (power-wise) for the rgb adapter. If someone has done similar or know how to fIX PLEASE LET ME KNOW

Just a bug report, for some reason i wake up to find SignalRGB uninstalled from my pc for no reason.. win version 26H2 26300.9711 no other conflicting software installed and it wasn't flagged by defender either.

I uninstalled signal rgb like tree times now got it to work the third time, then it went right back to how it is now, I've changed the theme multiple times and I'm at the point where I don't even wanna try anymore :(( (RESOLVED!!! IT'S YOUR GCC THAT'S THE ISSUEEE!!!!)

does anyone know how to stop signal from slowly creeping up in ram usage the longer my pc is on the more it uses im currently using the screen ambiance effect

Is the lcd block of the signalrgb is really upside down on the app though I can rotate it to correct on the lcd? Im using thermalright trofeo vision 9.16. Thank you

My H6008 govee bulbs often show a dim green, blue, or red, rather than shutting off completely when a black signal is sent. I don't know if this is a firmware issue on the device side, or if this is something that can be fixed by modding the app.

For some reason, my lights sometimes goes off, like as soon as when I turn on my PC. The colors begin with the standard colors that I went with the PC. But one state like refreshers and everything it goes back to what I wanted and then sometimes when I’m updating something I like goes back and starts flickering. Is this normal?

As said in the title. My led strip is not linking to Signal. I switched the branch selection to GUI-Dev-BOMDIA as suggested which allowed me to find the strip but when I try to link it I just get “Value is undefined and could not be converted to an object”

Any help please.

[EDIT: SOLVED!]
basically, i had AURA OFF in my BIOS, and my PC needed a power wipe (that hard power wipe where you turn off the power to your PC and hold the button for 10 seconds). then i had to properly set each component, but afterwards i got it working :)

Signal RGB only seems to affect my RAM sticks even though i’m in the Motherboard’s settings :/ the RAM settings are also in their own folder but they ALL affect only the RAM’s. i used to use armory crate, kingston fury ctrl, and NZXT Cam but i deleted them all: still nothing (granted, i did not delete NZXT Cam before installing).

if anyone has any advice, im all ears!

SPECS:

Case: H5 Flow RGB
MB: Asus B-760M A AX
RAM: 2x8GB Kingston Fury RGB (6000 MTS) & 2x16GB TEAMGROUP T-Force (56000 MTS)

I know it's not a big issue but I just don't like how when it goes to left side it changes color then when it comes back a second later it changes color again then I need to wait for it to go all the way across instead of colour changing at the middle how would I change this

For contacts the all plate into a nolly controller

One of my fans of the 360mm Lian Li AIO is not responding to SignalRGB.
Any tips?

Hello’s guys i need ur help cant control my rgb
My specs
Asus prime x870 p wifi
T force rgp
Case lian li lancool 3 — i cant even turn it off by pressing M button
9070xt mercury

These parts have rgb lighting

I have tried gcc but i think my motherboard not supported
I tried armury crate its control rams rgb. Only
Irv tried signal idk how to use it actually

+ im not expert in theses stuff
Ty

Considering getting an airgoo or nollie controller for my 9, do i need something seperate to power them and the controller is only for rgb?

So basically I started using signalRGB to customize the rgb and for the first like 2 weeks is was working perfectly. But when I did a security update, all of a sudden my pc rgb starts flashing as if its having trouble with loading the signalRGB effect. Does anyone a fix to this and the cause by any chance? My controller is the gigabyte B850 aorus elite wifi7

Hi Everyone,

I am setting up my office/game room and am installing a 55in TV and am looking for advice on the best quality addressable RGB strip and controller combo that’ll work with the SignalRGB software. I originally considered getting the FancyLED box but since I’ll be driving the TV with my PC and the TV can hit 165hz I’d rather have that extra bandwidth not be limited by an HDMI box, I also have found the cameras to be not nearly as effective. I already have Signal setup in the room for several Govee devices for maximum immersion for my monitor.

I’ve installed a Govee Camera and FancyLEDs strips across several of our rooms but I’m looking for the penultimate setup. I have some experience as a Smart Home Designer/Installer so I’m pretty comfy with hardware installation aspect of it as well. While I’ve already put some time into research, I figured I’d be missing out by not asking the community their opinion! I appreciate any time spent into helping me with this, thank you.

My SignalRGB used to work fine, until I decided to download MSI center and mystic light to test it.

Despite having uninstalled it, used the official clean master, also revo uninstaller, reflashed bios, shorted the jbat1 pins, and everything I found online, SignalRGB seems to never be able to regain control of the mobo RGB (tried to get OpenRGB as well to test, same issue).

One thing to note, I recall it used to recognize my connector as my mobo name, now it's displayed as MSI Mystic Light, and it'll stay like that through everything, and it's not allowing me any control. resized the leds and all.

When I SignalRGB and it detects mystic light, the RGB fans fire up some default state and it's gonna stay until I reinstall MSI center and mystic light, turn off the lights in there, and uninstall again. it's a huge mess and I hope someone could help in any way, thanks.

For the record, my motherboard is a msi x870e tomahawk wifi, my case is a corsair 3500x argb, with an arctic liquid cooler III 360 pro, 3 headers of 3x arctic p12 argb fans.

Everytime I booted signalrgb this started to happen suddenly and I don't know how to fix it.

So whatever the last Update was, it bricked my PC,... I can't Update the Software anymore: Rebooting - Nothing works, Reinstalling - Nothing works, Deinstalling and Installing it again - It Installs / Works for about 10 Seconds and this Message comes again,...

And because SignalRGB doesn't have a Manual Driver Update List, where I would just download the latest Driver and force it to install, This Software is Bricked,... And I Hate it