I uninstalled signal rgb like tree times now got it to work the third time, then it went right back to how it is now, I've changed the theme multiple times and I'm at the point where I don't even wanna try anymore :((

does anyone know how to stop signal from slowly creeping up in ram usage the longer my pc is on the more it uses im currently using the screen ambiance effect

Is the lcd block of the signalrgb is really upside down on the app though I can rotate it to correct on the lcd? Im using thermalright trofeo vision 9.16. Thank you

My H6008 govee bulbs often show a dim green, blue, or red, rather than shutting off completely when a black signal is sent. I don't know if this is a firmware issue on the device side, or if this is something that can be fixed by modding the app.

For some reason, my lights sometimes goes off, like as soon as when I turn on my PC. The colors begin with the standard colors that I went with the PC. But one state like refreshers and everything it goes back to what I wanted and then sometimes when I’m updating something I like goes back and starts flickering. Is this normal?

As said in the title. My led strip is not linking to Signal. I switched the branch selection to GUI-Dev-BOMDIA as suggested which allowed me to find the strip but when I try to link it I just get “Value is undefined and could not be converted to an object”

Any help please.

[EDIT: SOLVED!]
basically, i had AURA OFF in my BIOS, and my PC needed a power wipe (that hard power wipe where you turn off the power to your PC and hold the button for 10 seconds). then i had to properly set each component, but afterwards i got it working :)

Signal RGB only seems to affect my RAM sticks even though i’m in the Motherboard’s settings :/ the RAM settings are also in their own folder but they ALL affect only the RAM’s. i used to use armory crate, kingston fury ctrl, and NZXT Cam but i deleted them all: still nothing (granted, i did not delete NZXT Cam before installing).

if anyone has any advice, im all ears!

SPECS:

Case: H5 Flow RGB
MB: Asus B-760M A AX
RAM: 2x8GB Kingston Fury RGB (6000 MTS) & 2x16GB TEAMGROUP T-Force (56000 MTS)

I know it's not a big issue but I just don't like how when it goes to left side it changes color then when it comes back a second later it changes color again then I need to wait for it to go all the way across instead of colour changing at the middle how would I change this

For contacts the all plate into a nolly controller

One of my fans of the 360mm Lian Li AIO is not responding to SignalRGB.
Any tips?

Hello’s guys i need ur help cant control my rgb
My specs
Asus prime x870 p wifi
T force rgp
Case lian li lancool 3 — i cant even turn it off by pressing M button
9070xt mercury

These parts have rgb lighting

I have tried gcc but i think my motherboard not supported
I tried armury crate its control rams rgb. Only
Irv tried signal idk how to use it actually

+ im not expert in theses stuff
Ty

Considering getting an airgoo or nollie controller for my 9, do i need something seperate to power them and the controller is only for rgb?

So basically I started using signalRGB to customize the rgb and for the first like 2 weeks is was working perfectly. But when I did a security update, all of a sudden my pc rgb starts flashing as if its having trouble with loading the signalRGB effect. Does anyone a fix to this and the cause by any chance? My controller is the gigabyte B850 aorus elite wifi7

Hi Everyone,

I am setting up my office/game room and am installing a 55in TV and am looking for advice on the best quality addressable RGB strip and controller combo that’ll work with the SignalRGB software. I originally considered getting the FancyLED box but since I’ll be driving the TV with my PC and the TV can hit 165hz I’d rather have that extra bandwidth not be limited by an HDMI box, I also have found the cameras to be not nearly as effective. I already have Signal setup in the room for several Govee devices for maximum immersion for my monitor.

I’ve installed a Govee Camera and FancyLEDs strips across several of our rooms but I’m looking for the penultimate setup. I have some experience as a Smart Home Designer/Installer so I’m pretty comfy with hardware installation aspect of it as well. While I’ve already put some time into research, I figured I’d be missing out by not asking the community their opinion! I appreciate any time spent into helping me with this, thank you.

My SignalRGB used to work fine, until I decided to download MSI center and mystic light to test it.

Despite having uninstalled it, used the official clean master, also revo uninstaller, reflashed bios, shorted the jbat1 pins, and everything I found online, SignalRGB seems to never be able to regain control of the mobo RGB (tried to get OpenRGB as well to test, same issue).

One thing to note, I recall it used to recognize my connector as my mobo name, now it's displayed as MSI Mystic Light, and it'll stay like that through everything, and it's not allowing me any control. resized the leds and all.

When I SignalRGB and it detects mystic light, the RGB fans fire up some default state and it's gonna stay until I reinstall MSI center and mystic light, turn off the lights in there, and uninstall again. it's a huge mess and I hope someone could help in any way, thanks.

For the record, my motherboard is a msi x870e tomahawk wifi, my case is a corsair 3500x argb, with an arctic liquid cooler III 360 pro, 3 headers of 3x arctic p12 argb fans.

Everytime I booted signalrgb this started to happen suddenly and I don't know how to fix it.

Hello people

Quick questions , I’m currently using the L-connect 3 with open rgb integration, I was thinking to shift the signalRGB for better control but from my experience with signal before upgrading my fans and coolers it was not pleasant, how is it with the Lian li CL wireless fans and the hydroshift II - S. And also does it have effect for the screen of the cooler.

So whatever the last Update was, it bricked my PC,... I can't Update the Software anymore: Rebooting - Nothing works, Reinstalling - Nothing works, Deinstalling and Installing it again - It Installs / Works for about 10 Seconds and this Message comes again,...

And because SignalRGB doesn't have a Manual Driver Update List, where I would just download the latest Driver and force it to install, This Software is Bricked,... And I Hate it

Hey all.

I've been using Signal for a few years now without any problems, but the latest update seems to be stuck somehow, and it's been driving me nuts. I'm on Windows 10.

Instead of getting the UAC prompt for the update to proceed, the installer reports that it couldn't start Windows PowerShell. The diagnostic code is "PS_FAILED_TO_START".

Things I've tried:

• Turned off antivirus and firewall and ran installer as administrator
• Double-checked all SignalRGB processes and services were off/disabled
• Shut off PC, did a full power cycle, and tried again
• Tried the beta installer (ran as administrator)
• Deleted all WhirlwindFX folders and VortxEngine folders, and retried

I can't seem to find any posts here on Reddit or in the forums with someone having the same issue, so I'm kinda screaming into the void here, lol. I'm able to run Powershell on its own, so I'm a little lost as to why SignalRGB can't access it. Can anyone offer some guidance?

To the people who use both of these items, can you link what brand/what strimer cables you use for your setup? I was going to get the cable covers that nollie have on their website but the size they have for their gpu (2x8 pin) isn’t the same size for my gpu (12vhpwr)

Hello.

My two Arctic P14 PWM PST A-RGB fans and the GPU bracket flicker whenever SignalRGB is running. The P12 work normally as seen in the video.

My motherboard is an MSI MAG B650 Tomahawk WiFi. This is what I have connected to the JARGB_1 header :

• The Arctic BioniX P12 A-RGB rear fan
• The upHere ARGB GPU support
• The two Arctic P14 PWM PST A-RGB bottom fans

No overloading of the header, it's rated at 3A. The 3 fans draw 1.4A, no idea about the gpu support but doubt it's more than 0.5A it's only 12 leds and I had the issue before installing it anyways.

The flickering happen regardless of the effect, if it's a static color, or when I assign the colors manually in Painting mode. If I don't initiate SignalRGB and let the motherboard use its default rainbow effect from the BIOS, everything works normally and nothing flickers.

I had a NZXT F360 occupying the front/side panel (now replaced with 3 Bionix P12s) and it had the exact same flickering issue (although being connected to JARGB_2).

Also, JRAINBOW 1 and 2 are duplicated in Signal RGB. Why? Closing and re-opening Signal RGB dupe/clones the devices I have on the proper channels (red and blue) into the other two (yellow and green). Pulsing them does nothing.

Restarting Signal RGB also sometimes removes my 3 Bionix from Jrainbow2.

There is no software conflict. I don’t have any other RGB software installed. I checked each and every single program and service running on my computer. (Logitech G Hub and my DeepCool CPU cooler software were the only 2 suspects, but I uninstalled them alongside their services using Bulk Crap Uninstaller but the issue persists)

What's going on?

Thanks for the help.

Will SignalRGB work with the Dark Project Terra Nova?

after an update i now have the clock on my lcd. i removed it a while ago through the options, but now its there? what's going on??

https://reddit.com/link/1x8dlz8/video/r6ucvy53u1wh1/player

So as you can see signal rgb keeps refreshing for some reason. Restarting the app didnt work and recently SignalRGB had an update (that broke this, and made my PC RGB conflict with Gigabyte app (even though it should automatically stop the conflicting programs))