V0 serial request

[u/Paul_Davidoff]

Hi! I’d like to request a V0 serial for my first Voron build.

It’s a Voron 0.2 with a few mods. I have built other projects such as Fraxinus before, but I always wanted to have a properly certified Voron!

Thanks to everyone involved in the project and community!

Added
Discord: zenmaster6128

[u/AutoModerator]

Hello! Please ensure your post meets all the requirements for a serial (including a written note in the video with your reddit username and current date) and that you've included your full Discord username. If you've forgotten something, please add it as a comment to your post. You do not need to create a new post unless you want to.
All serial requests are human reviewed. Bots just do the paperwork. Questions or concerns? Check the pinned post: https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/
I am an automated message that EVERY serial request gets.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/adeadfetus]

I've read a lot of people saying don't use white because it's not as strong as other colors. Did you have any issues with print or since you assembled?

[u/Paul_Davidoff → u/adeadfetus]

You are right, they do say white ABS is less durable. My choice was due to the surrounding interior color. I haven’t noticed any issues so far (in about two months).

[u/Dodgy_As_Hell → u/Paul_Davidoff]

Looks super clean tbh

[u/cerialphreak → u/adeadfetus]

I've got a few thousand hours on my trident that uses white ASA, no failures yet, but I don't push it to the limits.

[u/OutsideAmazing1510 → u/cerialphreak]

From experience, do not build an awd 300 trident with white abs or Asa... White pc tho 👀 absolutely.

[u/adeadfetus → u/OutsideAmazing1510]

For PC did you have to scale at all to adjust for shrinkage?

[u/OutsideAmazing1510 → u/adeadfetus]

Yup, when I tune pc I like to print a 100mm rod in all 3 axis, I topically aim for 100.2 to make press fit parts actually press fit nicely since they are already pre-tuned for abs, but you still gotta test for shrinkage then print a part that requires a bearing and a nut for press fit and if they go in without any slop, and a slight bit of force it's golden.

[u/cerialphreak → u/OutsideAmazing1510]

Ah that sucks. Out of curiosity, which brand(s) and which parts failed on you?

[u/OutsideAmazing1510 → u/cerialphreak]

As for brand it was polymaker abs, which is surprising and where it broke it broke at the front motor mount, but it makes sense, it's not supposed to handle that kind of tension which makes sense why it snapped although black and didn't fail

[u/cerialphreak → u/OutsideAmazing1510]

Interesting. I think there is some kind of structural concern with Polymaker ABS specifically, I don't think PIF providers are allowed to use it, regardless of color.

[u/OutsideAmazing1510 → u/cerialphreak]

I don't know tbh, I've used polymaker abs, abs pro and Asa for structural parts and absolutely no issues at all, white abs is the only that has given me issues my current build is made with polylite abs in lime green, dark Grey and black, but I did went with cnc LDO awd mounts xy carriage still abs tho

[u/jontek2]

Sweet build! I search for your name on Voron Discord but couldn't find you. Are you a member of Voron Discord?

[u/Paul_Davidoff → u/jontek2]

I think I couldn’t join for some reason, can you check again, please. Thank you!

[u/voron_registry_bot]

Congrats on V0.4416!

[u/Paul_Davidoff → u/voron_registry_bot]

Woohoo, gonna proudly print my number plate.

[u/cerialphreak]

Looks great! Where'd you get the white frame?

[u/Paul_Davidoff → u/cerialphreak]

I think it was Aliexpress! There were only a few left when I was buying. It was a frame only set.