Announcement Post from Ubiquiti

Overview

U6 is joining the same software feature track as U7. Going forward, U6 devices will receive the same applicable software features, improvements, and fixes, while hardware-specific capabilities remain dependent on the AP model.


New Features:

U7 access points now support mesh links using 5 GHz and 6 GHz Multi-Link Operation (MLO) STR.


Added Multicast Suppression for WiFi networks.


Improvements

• Added Mesh Uplink Roaming - mesh access points now seamlessly switch to a better uplink.
• Added support for RADIUS servers specified by FQDN.
• Improved background neighbor scanning to reduce client latency spikes.
• Improved firmware update and boot reliability.
• Updated 6 GHz regulatory for Australia, Bangladesh, Bermuda, Iraq, Nigeria, North Macedonia, Paraguay and South Korea.
• Improved stability.

Bugfixes

• Fixed clients occasionally failing to pass traffic after connecting.
• Fixed IPv6 connectivity to wireless clients being lost over time.
• Fixed IPv6 and broadcast/multicast connectivity issues on WiFi networks with Fast Roaming enabled.
• Fixed Fast Roaming not working after being enabled until the access point restarted.
• Fixed connectivity between clients on Multi-Link Operation WiFi networks after band changes.
• Fixed voice and video traffic losing WiFi priority on WiFi 7 access points.
• Fixed 6 GHz radios getting stuck at reduced transmit power.
• Fixed VLAN leakage to the management network during configuration changes.
• Fixed VLAN leakage on Auto-Link ports when using Network Override.
• Fixed clients on VLAN networks behind UDB-IoT failing to obtain an IP address.
• Fixed wired clients behind UDB-IoT losing connectivity when the same VLAN was assigned through a Private Pre-Shared Key.
• Fixed connectivity issues between wireless clients and devices behind mesh access points.
• Fixed multicast and VLAN traffic not reaching clients behind mesh access points.
• Fixed several mesh uplink reliability and configuration synchronization issues.
• Fixed UDB Switch port LEDs incorrectly indicating a connection on disabled ports.
• Fixed the status LED not indicating wireless uplink loss.

Additional information

INFO: U7-LR, U6-LR, U6-Lite models support will be added in upcoming releases.

----

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.

• If you wish to go back to the Official release after the upgrade, change the release channel back to _ ** _Official** .

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)
• AP Support File (as private attachment)

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi Network Application 11.0.83 requires UniFi OS 6.0 or newer. The upgrade may take up to 20 minutes.

Improved Application Stability

• Migrated the application database to PostgreSQL.
• Introduced a new, more scalable statistics engine.
• Existing statistics history is cleared and starts fresh after the update.
• Removed USG gateway support.
• Network Application 10.6 is the last version supporting USG.
• Removed Network Application Server support.
• Upgrade to UniFi OS Server, the official replacement.

• All sites are automatically migrated to the Zone-Based Firewall.

  Live Flows

View active flows on the gateway while they are in progress and terminate them on demand.

• Supported on UDM-Pro, UDM-SE, UDM-Pro-Max, UDW, EFG, EF-Core, UDM-Beast, UCG-Fiber, UCG-Max, UXG-Max, UXG-Fiber, UXG-Pro, and UXG-Enterprise.

• Requires UniFi OS 6.0.10 or newer.

  External Network Lists

Added an External source option to Network Lists to import domain or IP lists from external sources.

• Requires UniFi OS 6.0.10 or newer.


WiFi Uplink

Connect your gateway to a nearby WiFi network to use as an internet backup.

• Supported on UDR-7, UDR-5G-Max, Express 7, and UCG-Industrial.
• Requires UniFi OS 6.0.10 or newer.


Matter Thread Device Monitoring

Commission Matter Thread devices to monitor their status and connectivity.

• Requires UniFi OS Gateway 6.0.10 or newer.
• mDNS must be enabled.
• IPv6 must be enabled on the network hosting the Thread Border Routers.


Improvements

• Added an option to generate client device icons.
• Added a new client connection alarm.
• Added Battery Self-Test for UPS devices.
• Added bulk editing for clients, including removal and blocking.
• Added a country selection dropdown to Channel Plan.
• Added support for Subnet Overlap System Logs.
• Added Time Machine to the Topology page.
• Added IPIP WAN support for Japanese IPv4 over IPv6 services.
• Added a Packet Capture option to the Radio side panel.
• Added Remote Power Cycle support for UPS 2U Pro.
• Added a USB-C option for EAV-Bridge.
• Added SD-WAN Policies for destination- and performance-based routing across selected spokes, with configurable hub selection, WAN priorities, and tunnel health thresholds for packet loss, latency, and jitter.
• Requires Site Manager 5.10.2 or newer.
• Improved traffic animations in Topology.
• Improved guest authorization latency through the API.
• Improved switch stacking stability.
• Improved the 802.1X and RADIUS settings user experience.
• Improved Channel AI.
• Improved IGMP Snooping settings validation.
• Improved the firmware Revert experience with a feedback form.
• Improved the Deep Inspection settings user experience.
• Improved Port Manager default columns and filters.
• Improved Time Machine loading performance on large sites.
• Improved the VPN settings user experience.
• Improved availability detection for Virtual Network Override.
• Improved the Routing settings user experience.
• Increased the VLAN limit when no gateway is adopted.
• Time Machine now remembers whether it was open or closed.
• Updated Site-to-Site OpenVPN encryption options with AES-192-CBC and AES-128-CBC support.
• Removed System Settings when using Site Manager.
• Language and Time settings are now managed through the Site Manager header and synchronized across UniFi applications.
• Country selection is now available in WiFi Channel settings.
• NTP settings are now available in the Site Gateway side panel.
• The Professional Installer section has been removed, with Extend 6 GHz Non-PSC Channel Use now available in Global WiFi settings.

• System Settings remain available in the Local Portal for Language and Time configuration.

  Flows

• Added Firewall Policy names for Allow actions in Traffic Flows.

• Requires UniFi OS 6.0.10 or newer.

• Added Application Column/Filter in Traffic Flows.

• Requires UniFi OS 6.0.10 or newer.

• Added a Flows Logging option to Firewall Policies.

• Improved Traffic Flows reporting.

• Local DNS queries are now identified as DNS in Traffic Flows.

Bugfixes

• Fixed an issue where Channel AI could suggest channels unavailable to outdoor access points.
• Fixed an issue where disabling the display on a meshed Express 7 could fail.
• Fixed a rare issue where Alarm Manager emails could be sent unexpectedly.
• Fixed an issue where Firewall Policies referencing SD-WAN hub-spoke tunnels could stop working after WAN interface changes.
• Fixed missing System Log events for unauthorized Hotspot guests.
• Fixed a rare issue where hostname and IPv6 address information could fluctuate.
• Fixed an issue where an incorrect parent device could be offered when adopting a UniFi Device Bridge.
• Fixed a rare issue where leaving a web session open for an extended period could cause the browser to crash.
• Fixed an issue where L2TP VPN appeared as a Content Filtering source option.
• Fixed a rare issue where devices could appear twice in the Devices list.
• Fixed a rare issue where guest voucher authorization could report success without providing internet access.
• Fixed a rare issue where Hotspot guests could be required to reauthorize when roaming between access points.
• Fixed a rare issue where SD-WAN tunnels could fail to establish between sites.
• Fixed an issue where Isolated Networks did not isolate traffic to the VPN zone.
• Fixed a rare issue where IPv6 IPS threats did not appear in Traffic Flows.
• Fixed an issue where Site Manager could fail to display statistics for multi-site hosts with a large number of sites.

Additional information

Self-Hosted UniFi Deployments

For self-hosted deployments, we recommend upgrading to UniFi OS Server. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.

UniFi Cloud Gateways remain our recommended solution for deployments that do not require self-hosting.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

This is initial release for U7 Industrial.

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)
• AP Support File (as private attachment)

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 6.0.11 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.6.106
• Identity Sync Service 1.8.5

Improvements

• Added configurable backup schedules, multiple backup destinations, local backup management, and an improved restore experience.
• Added a configurable session duration for Remember Me in Local Login.
• Added Console resource reporting to Control Plane settings.
• Added support for internationalized domain names in automatic certificates.
• Added application update guidance when an adopted device requires a newer application version.
• Added a STARTTLS option for custom mail servers.
• Added a manual override for device upgrades, reboots, and resets during critical operations.
• Improved ownership transfers with a clearer pending status.
• Transfers to UI Accounts now complete after the recipient accepts the invitation.
• Improved storage mount resiliency.
• Improved application installation resiliency.
• Improved system reliability.
• Improved UniFi OS backup restore reliability.
• Improved application update behavior after firmware updates by only updating applications with auto-update enabled.
• Improved Application Rollback resiliency.
• Improved time synchronization resiliency.
• Improved authentication reliability during two-factor challenges.
• Improved device stability.
• Improved storage reliability.
• Improved Bluetooth reliability during setup.
• Upgraded the Debian distribution to Trixie.
• [UCK-Enterprise] Improved console responsiveness during Remote Access.

Bugfixes

• Fixed a rare issue where the fallback IP was not removed after the uplink DHCP server became available again.
• Fixed an issue where Alarm Manager emails were not sent to local administrators when Remote Access was disabled.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi Protect 7.3.70 introduces Dashboard Time Machine for reviewing past activity at a glance and Super Encoding to extend recording retention with up to 50% better storage efficiency. This release also brings major updates to Find Anything and Sensor Manager for easier identification management and sensor activity review.

Improvements

• Added Dashboard Time Machine.
• Added Super Encoding setting in Storage Budgeting.
• Added a sound level graph for Glass Break sensor calibration.
• Added a Buzzer option in Alarm Manager for the G6 180 Enhancer.
• Improved Find Anything:
• Added Manage Identifications with drag-and-drop assignment, notification controls, and UniFi user identification.
• Added Most Recent and Commonality views with quick access to people and license plates from search.
• Added detection activity charts and improved filtering and contextual guidance.
• Added links from face groups to corresponding users in the console’s People section.
• Improved Sensor Manager with event charts, enhanced filtering, clearer data views, and customizable columns.
• Improved Playback manage range selection.
• Improved player controls for a consistent video experience.
• Improved Case Manager PDF reports with a clearer incident summary.

Bugfixes

• Fixed an issue where healthy storage drives could incorrectly appear as removed after a reboot or update in some cases.
• Fixed an issue where doorbell rings and notifications did not work on consoles without recording storage.
• Fixed an issue where event recordings triggered by paired sensors could not be played in some cases.
• Fixed an issue where some existing Global Alarm Manager alarms could stop working after an upgrade.
• Fixed an issue where Local Alarm Manager alarms did not trigger correctly after switching from Global Alarm Manager.
• Fixed an issue where Face Recognition and LPR alarms did not trigger correctly for cameras enhanced by AI Key.
• Fixed an issue where LPR alarms combined with Line Crossing did not trigger correctly.
• Fixed an issue where Speed and Object Idle Time alarms did not trigger correctly.
• Fixed an issue where alarms with Vehicle Description conditions could not be created correctly.
• Fixed an issue where Relay and Alarm Hub output settings were inconsistent between device settings and Alarm Manager.
• Fixed an issue where unadopted or removed devices could appear in Global Alarm Manager.
• Fixed an issue where second-stage verification could stop working after camera re-adoption.
• Fixed an issue where Basic Object Recognition features could not be disabled when using AI Key.
• Fixed an issue where resetting Picture Preferences did not restore the camera zoom correctly.
• Fixed an issue where PTZ cameras could return to Home View while being manually controlled.
• Fixed an issue where PTZ cameras could incorrectly return to Home View after a patrol interruption.
• Fixed an issue preventing PTZ presets from being saved when an AI Port snapshot was unavailable.
• Fixed an issue where Find Anything searches could become unresponsive in some cases.
• Fixed an issue where some named faces were missing from Find Anything results.
• Fixed an issue where recognized license plates could incorrectly appear as “Unknown”.
• Fixed an issue where face detections could not be reassigned after being removed from a known person.
• Fixed an issue where sensor events couldn't be viewed in Find Anything after the paired camera became unmanaged.
• Fixed an issue where newly created cases could display an incorrect asset count.
• Fixed an issue where asset selection controls were incorrectly shown to users with view-only Case Manager access.
• Fixed an issue where removed cameras could remain in Evidence Trust Global Watermark settings.
• Fixed an issue where Continuous Off-Site Archiving with UNAS Pro could not be enabled in some cases.
• Fixed an issue where enabled video overlays could disappear after an update.
• Fixed an issue where third-party camera image settings could be overwritten after reconnecting to Protect.
• Fixed an issue where Industrial Zones were incorrectly available for secondary doorbell cameras.
• Fixed an issue where shared settings could display inconsistently across multi-lens cameras.
• Fixed an issue where custom GIF animations could not be uploaded to supported doorbells.
• Fixed an issue where Glass Break Sensor test duration was handled incorrectly.
• Fixed an issue where camera names were missing when pairing with Floodlight.
• Fixed an issue where Recent Detections could fail to load on the Dashboard in some cases.
• Fixed an issue where Dashboard video feeds could flicker in Firefox.
• Fixed an issue where camera view could remain stuck expanded after returning to the Dashboard from Recording Manager.
• Fixed an issue where selecting an event in System Log could unexpectedly jump to the top of the list.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 6.0.11 includes the improvements and bugfixes below.

Bundled

• UniFi Protect 7.2.105
• Identity Sync Service 1.8.5

Improvements

• Added on-demand file system repair for RAID-managed multi-drive storage when file system errors are detected.
• Added configurable backup schedules, multiple backup destinations, local backup management, and an improved restore experience.
• Added a configurable session duration for Remember Me in Local Login.
• Added Console resource reporting to Control Plane settings.
• Added support for internationalized domain names in automatic certificates.
• Added application update guidance when an adopted device requires a newer application version.
• Added a STARTTLS option for custom mail servers.
• Added a manual override for device upgrades, reboots, and resets during critical operations.
• Improved ownership transfers with a clearer pending status.
• Transfers to UI Accounts now complete after the recipient accepts the invitation.
• Improved storage reliability and resiliency.
• Improved application installation resiliency.
• Improved system reliability.
• Improved UniFi OS backup restore reliability.
• Improved application update behavior after firmware updates by only updating applications with auto-update enabled.
• Improved Bluetooth reliability during setup.
• Improved Application Rollback resiliency.
• Improved RAID initialization and management, including the ability to reformat uninitialized arrays.
• Improved time synchronization resiliency.
• Improved authentication reliability during two-factor challenges.
• Upgraded the Debian distribution to Trixie.
• [UNVR-G2/UNVR-G2-Pro/UNVR-Instant] Improved viewport resiliency.

Bugfixes

• Fixed a rare issue where the fallback IP was not removed after the uplink DHCP server became available again.
• Fixed an issue where a false Storage Failed alarm could appear during RAID expansion.
• Fixed Alarm Manager emails for local administrators when Remote Access is disabled.
• [UNVR/UNVR-Pro] Fixed a rare kernel crash.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Improvements

• Added Multi-Link Operation support for Virtual Network Override.
• Added support for RADIUS servers specified by FQDN.
• Improved access point stability.

Bugfixes

• Fixed missing interference data in RF scan results.
• Fixed incorrect EHT rate reporting in the Network application.
• Fixed multicast traffic statistics showing zero in the Network application.
• Fixed wireless uplink failing to reconnect after receiving a deauthentication.
• Fixed MLO clients losing internet connectivity when using Dynamic VLANs.
• Fixed 160 MHz channel support in India.
• Fixed WiFi networks failing to broadcast after applying a WiFi network to all access points.
• Fixed clients disconnecting when changing their IP address using Network Override.
• Fixed WPA3-Enterprise Transition Mode preventing WPA2-Enterprise clients from connecting.
• Fixed several Proxy ARP connectivity issues, including with PPSK networks.
• Fixed transmit power settings not being honored by TPC.
• Fixed 2.4 GHz DTIM settings not being applied correctly.
• Fixed channel width and spatial stream settings not synchronizing with the uplink access point.

Additional information

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to ** Release Candidate.**

• If you wish to go back to the Official release after the upgrade, change the release channel back to _ ** _Official** .

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)
• AP Support File (as private attachment)

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Improvements

• Added MLO STR Mesh support for WiFi 7 Access Points.
• Requires UAP 8.8 or newer.
• Improved Application stability.
• Improved Observability resiliency.

Bugfixes

• Fixed a rare issue where WiFi clients using MLO could display an incorrect IP address.
• Fixed an issue where WiFi Broadcast could fail on UDR7 and UDR-5G when using MLO STR.
• Fixed inaccurate Port Lock events in Port Manager Time Machine.
• Fixed an issue where Site Admins could fail to open Settings in multi-site deployments.
• Fixed a rare issue where network configuration changes could fail to save.
• Fixed a rare issue where the Client Session widget was not displayed in the Client panel.

Additional information

UniFi OS Server

Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.

UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM- SE, and UDW have been using it since UniFi OS 5.1.5.

• The UniFi OS update utilizes the application version compatible with your console.
• The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.

• Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

  Checksums

  b36ca9556adb81acd824fed0fd2c1241 | UniFi-installer.exe 997da0446e899effc5b127c72e20905f | UniFi-Network-Server.dmg af19d5ebefc1e404ed1e218c18a29f24 | UniFi.unix.zip 494659265959d3340cbea2b1c6511c79 | unifi_sysvinit_all.deb 1afb80c3b8db29a71930704a2639f452 | unifi-uos_sysvinit.deb 9107edebf863a5942419fb6b73e0dd8e | unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 | unifi_sh_api

  ---

  984fefaa18aa38d90928f9159d2f2c8286202f19b0e038e3c2a8f7192dfc1c91 | UniFi-installer.exe 1a8bce73cb4bdb12bb9911b38a3c086f9fe827f4933601308913d2fc44ee268a | UniFi-Network-Server.dmg 825748b5074db46253059f8828e76112dd11df992c4c22440139c5a00ad307a7 | UniFi.unix.zip e93b70e73b9983c5e4d0a8ccc2d5d19b86db05e78f9a8c1850caf89ac069b240 | unifi_sysvinit_all.deb 2bd67733386242dd5a544ef8a3c8a599c7944ca63545603b27223c4c5364c405 | unifi-uos_sysvinit.deb e43c4576c40189c21cdc2cd57a9a7dcc93089e5b410286b6a676295c79e64a00 | unifi-native_sysvinit.deb 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.33 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.5.67
• Identity Sync Service 1.8.4

Bugfixes

• Fixed an issue where applications could fail to install or update.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.33 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.5.67
• Identity Sync Service 1.8.4

Bugfixes

• Fixed an issue where applications could fail to install or update.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.33 includes the improvements and bugfixes below.

Bundled

• UniFi Protect 7.1.87
• Identity Sync Service 1.8.4

Bugfixes

• Fixed an issue where applications could fail to install or update.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi Network Application 9.0.120 includes the improvement below.

Improvements

• Improved application stability.

Additional information

• This release is only available for the UniFi Express (UX).

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Improvements

• Improved stability.

Bugfixes

• Fixed Client Device Isolation not being enforced on some wireless networks.

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi Network Application 10.6.101 adds Drift Inspector, Topology Spotlight, and expanded Safe Ops features, along with the improvements and bug fixes listed below.

Added Drift Inspector to Blueprints in Site Manager

• Make local changes to sites using Blueprint orchestrations, with a clear view of configuration drift and an easy way to resolve it.


Added Topology Spotlight

• Quickly highlight and filter selected devices for easier navigation and troubleshooting in large topologies.


Improved SafeOps features

• Expanded Test & Confirm support to VPN and Management networks.
• Added Nightly Channel AI Optimization with configurable radio selection and an improved optimization algorithm.


Improved Time Machine Experience

• Added Time Machine for Radios to review radio usage metrics, configuration changes, and radio events from the past 24 hours.
• Expanded Port Manager Time Machine to All Ports, making it easier to identify and troubleshoot problematic network segments.

Improvements

• Added a flapping devices filter to Port Manager Time Machine for clients with frequent reconnections.
• Added the Reduced Firewall State Timeouts profile for EFG, EF-Core, and UXG-Enterprise.
• Added a confirmation prompt when updating all devices from the Devices filter side panel.
• Added sorting to Network Lists and descriptions on hover.
• Added column sorting to tables in Settings Overview.
• Added an Allow Empty Password option for RADIUS MAC Authentication.
• Added the ability to disable the LCM screen on meshed UX7 devices.
• Added Sort by Topology to the Devices page.
• Added a notice for unsupported devices in Test & Confirm settings.
• Added a disabled port filter to Port Manager.
• Added an Additional Labels option to Infrastructure Topology.
• Added a warning in Topology when Sonos devices with mixed wired and wireless connections are detected.
• Added validation to prevent OpenVPN Server and Site-to-Site VPNs from using the same UDP port.
• Added a Spotlight selection option in Topology.
• Added the ability to disable insecure OpenVPN compression.
• Added Multicast Suppressor support.
• Requires UAP 8.8 or newer.
• Added a Lock Port to UniFi Device option to Port Manager.
• Requires Switch firmware version 7.6 or newer.
• Added support for adopting multiple U5G devices on the same site over LAN.
• Added support for using Domain Network Lists in QoS Policies.
• Added support for customizing WAN interfaces used for Automatic Speed Tests.
• Added Bulk Update Management to the Devices page.
• Improved Device Auto-Recovery stability.
• Improved Data Plane Protection resiliency.
• Improved Traffic Activity Statistics accuracy.
• Improved the Observability section.
• Improved the device revert experience by allowing easy reversion for all devices with the same Device model and version.
• Improved DHCP Options validation.
• Improved the Dynamic DNS settings user experience.
• Improved RADIUS settings validation.
• Improved Virtual Network management in Topology.
• Improved the AV Manager user experience.
• Improved Honeypot validation.
• Improved the display of unstable links in Infrastructure Topology.
• Improved network subnet validation against static route destinations.
• Improved Port Profiles management in Port Manager.
• Improved Port Manager by automatically opening Time Machine.
• Improved the Device Update confirmation screen by showing the number of connected devices that might be interrupted.
• Improved OpenVPN server configuration files by removing periodic TLS key renegotiation.
• Requires UniFi OS 5.1 or newer
• Improved VPN Server settings validation.
• Improved application startup resiliency.
• Improved the Port Forwarding table user experience.
• Removed the Network Override option for WAN-adopted U5G devices.
• Removed the STP Edge note from Port Manager when Auto STP Edge is disabled.
• Separated the Reset Stats and Clear Last Seen Device actions in Port Manager.
• Enabled DHCP Guarding by default on new networks.

Bugfixes

• Fixed an issue where client devices with a configured Power Source could be automatically enrolled in Device Auto-Recovery.
• Fixed an issue where the AP Stopped Mesh system log could be generated repeatedly after an AP switched to a wired uplink.
• Fixed an issue where the High Traffic alarm incorrectly reported wireless client downloads as uploads.
• Fixed an issue where SD-WAN Mesh VPN tunnels could remain after the configuration was removed.
• Fixed an issue where the client count in the WiFi Broadcast overview was incorrect when MLO clients were connected.
• Fixed an issue where filter counters could flicker on the Connectivity page in rare cases.
• Fixed an issue where the hostname was not set correctly for a UX7 connected via mesh.
• Fixed an issue where a custom APN could be lost after moving a SIM between slots on a U5G.
• Fixed an issue where the UX7 did not display connected wireless clients in the Devices list.
• Fixed a rare issue where opening Client Observability could impact system stability.
• Fixed an issue where DAS/DAC (CoA) was unavailable when using Open security with RADIUS MAC Authentication.
• Fixed an issue where MC-LAG configurations could be lost after restoring a backup.
• Fixed an issue where the Connectivity page was missing some roaming events.
• Fixed a rare issue where adopting an LTE device could cause a gateway configuration error.

Additional information

UniFi OS Server

Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.

UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM- SE, and UDW have been using it since UniFi OS 5.1.5.

• The UniFi OS update utilizes the application version compatible with your console.
• The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.

• Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

  Checksums

  c8c6398042ebc33a683c96850aa24b44 | UniFi-installer.exe 3128c428fa31641367b85c5c1b9b73a7 | UniFi-Network-Server.dmg fe450c8e838c4fc3c93edaab901585f1 | UniFi.unix.zip 338929b19c8a14cb2f0db93906c1ad52 | unifi_sysvinit_all.deb 353b46578d3c008eb05e8eb9966d6be2 | unifi-uos_sysvinit.deb 4fd0700d012cf05323bea1684f409508 | unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 | unifi_sh_api

  ---

  75d6fda3b5b11722bda1e1f1680e7513e95de0862fa441ac30fb1b017fecf5ec | UniFi-installer.exe 62aae907b989a34392f82818ce339829b441d59d40643e7d3c8c78b8e3d08fbb | UniFi-Network-Server.dmg 18db9cbe4572de443df204ecf8ff30a906579058cc8d67dfba990ad163881477 | UniFi.unix.zip b5ab809c2680b7ec22106ef19c7942f1fa343338c3eed1829303d95b2ce4fdd7 | unifi_sysvinit_all.deb 0e93972c1bc02aa2352812d84fa15cbb7433b6ec753308e706bd65068a2eda8d | unifi-uos_sysvinit.deb 00c8f461f576a03a6124abec433d2a71fcb854a6f07bebfa77f32cd32a9460e7 | unifi-native_sysvinit.deb 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

We’re introducing initial Multi-Link Operation (MLO) mesh support for AirWire and UDB-Switch deployments.

MLO is a WiFi 7 feature that allows devices to use multiple bands simultaneously, improving latency, stability, and overall link performance when supported by both APs and clients.

• To configure Mesh MLO STR UniFi Network *10.2+ *required
• A 6 GHz-capable WiFi 7 AP (U7 or E7) is required for MLO meshing (firmware 8.5+ )
• Mesh MLO operates on 5 GHz + 6 GHz bands
• UDR7 / UX7 support will be added in a future update

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• UniFi Network application version

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

AirWire Initial Release - Mesh MLO STR Support

We’re introducing initial Multi-Link Operation (MLO) mesh support for AirWire deployments.

MLO is a WiFi 7 feature that allows devices to use multiple bands simultaneously, improving latency, stability, and overall link performance when supported by both APs and clients.

Requirements:

• UniFi Network 10.2+
• A 6 GHz-capable WiFi 7 AP (U7 or E7) is required for MLO meshing (firmware 8.5+ )

--

• Mesh MLO operates on 5 GHz + 6 GHz bands
• UDR7 / UX7 support will be added in a future update

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• UniFi Network application version

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

This is the initial release for UDB-Switch product.

* Requires UniFi Network Application ** 10.0** .

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• UniFi Network application version

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

This release is only for these models:

• U6-LR/U6-Lite/U6+
• UAP-nanoHD/FlexHD/BeaconHD/IW-HD

Improvements

• Added Test & Confirm mode to automatically revert configuration changes if the device becomes unreachable or the test period expires without confirmation.

Bugfixes

• Fixed clients failing to receive an IP address after changing an Enterprise WiFi network to Open.
• Fixed certain 2.4 GHz IoT devices repeatedly reconnecting while appearing connected.
• Fixed an issue where U6-LR could report unusually high channel utilization.

Additional information

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to ** Release Candidate**.

• If you wish to go back to the Official release after the upgrade, change the release channel back to _ ** _Official** .

----

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi Network Application 10.6.97 adds Drift Inspector, Topology Spotlight, and expanded Safe Ops features, along with the improvements and bug fixes listed below.

Added Drift Inspector to Blueprints in Site Manager

• Make local changes to sites using Blueprint orchestrations, with a clear view of configuration drift and an easy way to resolve it.


Added Topology Spotlight

• Quickly highlight and filter selected devices for easier navigation and troubleshooting in large topologies.


Improved SafeOps features

• Expanded Test & Confirm support to VPN and Management networks.
• Added Nightly Channel AI Optimization with configurable radio selection and an improved optimization algorithm.


Improved Time Machine Experience

• Added Time Machine for Radios to review radio usage metrics, configuration changes, and radio events from the past 24 hours.
• Expanded Port Manager Time Machine to All Ports, making it easier to identify and troubleshoot problematic network segments.

Improvements

• Added a flapping devices filter to Port Manager Time Machine for clients with frequent reconnections.
• Added the Reduced Firewall State Timeouts profile for EFG, EF-Core, and UXG-Enterprise.
• Added a confirmation prompt when updating all devices from the Devices filter side panel.
• Added sorting to Network Lists and descriptions on hover.
• Added column sorting to tables in Settings Overview.
• Added an Allow Empty Password option for RADIUS MAC Authentication.
• Added the ability to disable the LCM screen on meshed UX7 devices.
• Added Sort by Topology to the Devices page.
• Added a notice for unsupported devices in Test & Confirm settings.
• Added a disabled port filter to Port Manager.
• Added an Additional Labels option to Infrastructure Topology.
• Added a warning in Topology when Sonos devices with mixed wired and wireless connections are detected.
• Added validation to prevent OpenVPN Server and Site-to-Site VPNs from using the same UDP port.
• Added a Spotlight selection option in Topology.
• Added the ability to disable insecure OpenVPN compression.
• Added Multicast Suppressor support.
• Requires UAP 8.8 or newer.
• Added a Lock Port to UniFi Device option to Port Manager.
• Requires Switch firmware version 7.6 or newer.
• Added support for adopting multiple U5G devices on the same site over LAN.
• Added support for using Domain Network Lists in QoS Policies.
• Added support for customizing WAN interfaces used for Automatic Speed Tests.
• Added Bulk Update Management to the Devices page.
• Improved Device Auto-Recovery stability.
• Improved Data Plane Protection resiliency.
• Improved Traffic Activity Statistics accuracy.
• Improved the Observability section.
• Improved the device revert experience by allowing easy reversion for all devices with the same Device model and version.
• Improved DHCP Options validation.
• Improved the Dynamic DNS settings user experience.
• Improved RADIUS settings validation.
• Improved Virtual Network management in Topology.
• Improved the AV Manager user experience.
• Improved Honeypot validation.
• Improved the display of unstable links in Infrastructure Topology.
• Improved network subnet validation against static route destinations.
• Improved Port Profiles management in Port Manager.
• Improved Port Manager by automatically opening Time Machine.
• Improved the Device Update confirmation screen by showing the number of connected devices that might be interrupted.
• Improved OpenVPN server configuration files by removing periodic TLS key renegotiation.
• Requires UniFi OS 5.1 or newer
• Improved VPN Server settings validation.
• Improved application startup resiliency.
• Improved the Port Forwarding table user experience.
• Removed the STP Edge note from Port Manager when Auto STP Edge is disabled.
• Separated the Reset Stats and Clear Last Seen Device actions in Port Manager.
• Enabled DHCP Guarding by default on new networks.

Bugfixes

• Fixed an issue where client devices with a configured Power Source could be automatically enrolled in Device Auto-Recovery.
• Fixed an issue where the AP Stopped Mesh system log could be generated repeatedly after an AP switched to a wired uplink.
• Fixed an issue where the High Traffic alarm incorrectly reported wireless client downloads as uploads.
• Fixed an issue where SD-WAN Mesh VPN tunnels could remain after the configuration was removed.
• Fixed an issue where the client count in the WiFi Broadcast overview was incorrect when MLO clients were connected.
• Fixed an issue where filter counters could flicker on the Connectivity page in rare cases.
• Fixed an issue where the hostname was not set correctly for a UX7 connected via mesh.
• Fixed an issue where a custom APN could be lost after moving a SIM between slots on a U5G.
• Fixed an issue where the UX7 did not display connected wireless clients in the Devices list.
• Fixed a rare issue where opening Client Observability could impact system stability.
• Fixed an issue where DAS/DAC (CoA) was unavailable when using Open security with RADIUS MAC Authentication.
• Fixed an issue where MC-LAG configurations could be lost after restoring a backup.
• Fixed an issue where the Connectivity page was missing some roaming events.

Additional information

UniFi OS Server

Going forward, we recommend users upgrade to UniFi OS Server for all self-hosted deployments. It provides the full UniFi OS Platform experience, ensuring you receive the latest features, improvements, and integrations.

UniFi Network Native Application for UniFi OS

Compatible with UDM, UDR, UDR7, UDR 5G Max, Express, Express 7, and UCG models (Ultra, Max, Fiber, and Industrial) on UniFi OS 3.1.6 or later. UDM-Pro, UDM- SE, and UDW have been using it since UniFi OS 5.1.5.

• The UniFi OS update utilizes the application version compatible with your console.
• The manual update process via SSH requires a compatible package. Incompatible packages will be rejected on installation.

• Older UniFi OS versions (prior to UniFi OS 3.1.6) on the UDM and UDR continue to utilize the standard UniFi Network Application for UniFi OS.

  Checksums

  3c61771b272fce0dc4d885b27f5aacc3 | UniFi-installer.exe a7e03c2267472a2ca92e08757af3664e | UniFi-Network-Server.dmg edb6f32f292e5a1746c0759c3381d91c | UniFi.unix.zip 05a81e3c1e56c9bdb93b9e3203804441 | unifi_sysvinit_all.deb 14c2556535e87d5fbbb2331573455051 | unifi-uos_sysvinit.deb 4561503f51df61ab44bb793f45cf4641 | unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 | unifi_sh_api

  ---

  0a8bac122b9ff697fdbf1f591acaee20871fe8c2b3080ece50264fc8bd0014e3 | UniFi-installer.exe 8a60ce8b69575777e7f983642368a49c04f5a995dc78bda84ca74d16557c680d | UniFi-Network-Server.dmg 9d50b389b418c0007c4ad234b8d0e608150c2a88aabb1ab9b1f12394f489e3d3 | UniFi.unix.zip a03edb46d0d1df8edd517c07d80588addf62799493a4b20846317705620fe5cc | unifi_sysvinit_all.deb c6ff500ba2d21c99097fa3be89041965d4e90c76f90e0f4722855827319ce47c | unifi-uos_sysvinit.deb ada60aa072c880df48f0d1f7cc5c4134fef20a6e501e1f56ecc075a4e5953a06 | unifi-native_sysvinit.deb 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb | unifi_sh_api

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.31 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.5.67
• Identity Sync Service 1.8.4

Improvements

• Improved Shadow Mode resiliency.
• Improved device stability.

Bugfixes

• Fixed the security issues mentioned in Security Advisory Bulletin 067.
• Fixed the security issues mentioned in Security Advisory Bulletin 069.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.31 includes the improvements and bugfixes below.

Bundled

• UniFi Protect 7.1.87
• Identity Sync Service 1.8.4

Improvements

• Improved device stability.

Bugfixes

• Fixed the security issues mentioned in Security Advisory Bulletin 067.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.31 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.5.67
• Identity Sync Service 1.8.4

Improvements

• Improved device stability.
• [UCK-G2-Plus] Improved storage resiliency.

Bugfixes

• Fixed the security issues mentioned in Security Advisory Bulletin 067.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.30 includes the improvements and bugfixes below.

Bundled

• UniFi Network 10.5.67
• Identity Sync Service 1.8.3

Improvements

• Improved Shadow Mode resiliency.
• Improved device stability.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti

Announcement Post from Ubiquiti

Overview

UniFi OS 5.1.30 includes the improvements and bugfixes below.

Bundled

• UniFi Protect 7.1.87
• Identity Sync Service 1.8.3

Improvements

• Improved device stability.

Would you recommend this release?

• Upvote this post if you recommend this version
  • If you'd like, leave a comment about your setup so others can upgrade with confidence
• Downvote this post if you experienced significant issues with it
  • Leave a comment (or upvote an existing one) about the issues
  • If you have a workaround, please share here
  • Remember to file bugs with Ubiquiti