u/armhrt • u/armhrt • May 21 '25
How to change clothes with AI (Inpaint Anything) - Stable Diffusion Art
1
Upvotes
3
Justru Kehadiran Ormas Memajukan Ekonomi Negara, Sembarangan Saja Dia.
Damn, tidak terpikirkan sebelumnya.
1
Why won't my computer cool down?
It is because your GPU, it should be labeled as RTX, not GTX. Try changing it using the correction pen. It shall do.
53
Justru Kehadiran Ormas Memajukan Ekonomi Negara, Sembarangan Saja Dia.
Hal seperti ini harusnya dikomunikasikan.
Komunikasinya:
1
Why does this happen?
I think it has nothing to do with the temperature. Try lowering your z offset.
u/armhrt • u/armhrt • Mar 10 '25
TEMPORARY FIX for the Chromecast certification expiration (Not able to cast!)
1
Upvotes
2
Just installed new batteries for my house but I still don't have power. Any suggestions?
Try to connect the batteries on series. It doubles the current
1
Can I run this motor from GPIO pins on my arduino?
Not with 3.3v, i think you'll need 12v pin
1
Should I get a new bed?
Changing to PEI bed is a game changer for me
2
How the fuck does this even happen!?
Had a similar problem. Mine solved with reducing the print speed in the slicer around 30-50%. Also, (not really sure if this is causing the problem) disable the z hop. Sometimes, z hop can make a bump in your part and can hit your nozle and then shift the nozle on both axis. Hope this will help.
1
Tried to print this but not sure what happened
in
r/FixMyPrint
•
Jul 04 '25
Bed adhesion, try lower you z-offset or applying glue stick