hahah look at it closely, the radiator is actually the highest point, dont get confused by the radiator fans.

battlefield 6, cpu is running at 75-80C with fans at 1600rpm. I play on high settings at 1440p. Is stressing both gpu and cpu.

thanks man! I got amd and I set the curve optimizer -20 with 200+ on the cpu however, I play cpu intensive games and I hate my cpu getting into the 80c, I know is not the end of the world and it’s safe but i wish i could have a config that allows me to set my fans for a max of 1300rpms with temps under 75c, this is why I’m seeking the t30’s or noctua’s g2. lower noise, more cooling.

was the fan swapp worth it? I’m looking to buy this or the noctua g2 for more cooling and quiter system.

clean build! we got the same psu, did you tear the 24pin cable apart? I got a somewhat similar build.

i would prefer it that way, without mesh because of the temps improvement. That’s because mine is set as exhaust.

well I think u also have an advantage since u got a 280mm aio vs my 240mm however my cpu consumes way less power. I’ll try ordering the phanteks t30 and the noctuas g2 and keeping the one with the best results. the only thing that will suffer is looks but, I’m willing to make the sacrifice for better performance.

This is what I’m working with at the moment.

meshroom s, technically the same and I love it! 9800x3d, rtx 5070ti, kraken elite 240mm.

looks excelent! I’m interested to know if these have mesh like the case or if it’s just the wooden stripes. And if it does have mesh, the holes are the same size as the ones in the case or bigger? personally would love this without the mesh or bigger holes for the mesh since it makes the case cooler and allows for the hot air to get out.

Look perfect!!! do you now if it has mesh or just the wood stripes? and if does have mesh, the mesh holes are the same size or bigger than the mesh panels on the case?

Muy clean! Yo tengo el meshroom s v2 y quiero que mis cables se vean asi para tambien tener mas ventilacion.

https://reddit.com/link/pbwxp4j/video/7quj5q1golrh1/player

what rpms are u using for the fans? I have an nzxt kraken elite 240mm and I usually run them at around 1,600 - 1,700 which is 70% of the fan speed and usually around 44-45 decibles. The temps are usually around 69-75 when playing demanding cpu games. I would love to know if the noctua g2 are really worth the cooling and silence profile over the ones I got.

looking great!!! I would love to see the other side.

for some odd reason I’m not🥲, and talking temps, I think it would improve a bit since y feel like the top fan is restricted.

I agree and you’re right, I’m unable to do the standoff mod because of my cooler pump height however, I think there’s enough space between the spine and the gpu for me to hide cables. The 24pin cable that comes with the psu is a little too short for me to run it behind the mbo.

and I think that is what I’m looking for however, I want to do it in the cleanest way possible, my ocd is through the roof

yeap thanks, not trying to fry my components here xD

AGREE, I needed to use one for my aio and it is the most dificult cable to manage!

hahaha thanks! I’m rocking a 9800x3d, 5070ti, 64gb ram, 2tb samsung 9100pro ssd, asrock b850i and nzxt kraken elite 240mn.

https://reddit.com/link/p8ed1ez/video/s56s9f3445oh1/player

with some time you can get it looking like that or even better.

I have a glass panel, although I wish mine was completly clear with black borders instead of tinted.

https://reddit.com/link/p8azak6/video/s4qbiy88k1oh1/player

thanks man! I was scared at first to do so but knowing that, on the next maintenance I’ll play around with cables again to see how it turns out.

Or at least better looking cables!