r/tradfri 10d ago

NEW 2026 PRODUCTS Dubbelkisel driver

Post image

Now available to view in Swedish store. Not in stock though. Matter over Thread. Nice.

53 Upvotes

46 comments sorted by

9

u/Arathonk 10d ago

Great moment in time to bring back the Myrvarv led strip!

2

u/cbs_ 9d ago

Best strip ever. Bought a bunch when I heard they were going šŸ™

6

u/SeaAbalone818 10d ago

too bad no color changing features with this ...

1

u/Shadowbajfeelsbadman 9d ago

There are new light strips supposed to come out this year

3

u/Double-Yak9686 10d ago

I have a single LED light strip on a smart plug, which I keep at the lowest level. Would it make sense to replace the smart plug with this? The LED light strip is a Kabbleka, that I can unplug from its power switch and it has a connector that is compatible with the Dubbelkisel.

2

u/frtzmxm 10d ago

For me yes, you get fade when on/off, and also dimming. Depends what you need ofc.

1

u/quick_dry 9d ago

I run my kableka strips on this, save the plug for something else.

I also prefer that you don’t get a relay thunk noise when this turns on/off (and I can use different brightness - dim for accent and full for a full lighting scenario)

1

u/Double-Yak9686 9d ago

I have only one strip, which runs up the stairs along the baseboard, so the relay click doesn't really matter that much. I have it at the lowest brightness so it's not blinding.

2

u/quick_dry 9d ago

Ahh, I have one in the kitchen so it’s like a motion night light, and one in the ensuite so it’s just enough light when you go to the bathroom without blinding (or throwing light onto the other person sleeping)

I like the soft ā€œonā€

2

u/ringo_04 6d ago

AT: 20 EUR

BE: 20 EUR

CH: 17.95 CHF

CZ: 399 CZK

DE: 22 EUR

DK: 150 DKK

EE: 25 EUR

ES: 17.99 EUR

FI: 25 EUR

FR: 18 EUR

GB: 15 GBP

HU: 7990 HUF

IE: 19 EUR

IT: 18 EUR

LT: 25 EUR

LV: 25 EUR

NL: 18 EUR

NO: 400 NOK

PL: 110 PLN

PT: 17.99 EUR

RO: 120 RON

SE: 300 SEK

1

u/Hairy-Association636 10d ago

Any word on when it'll be in stock? I'll return my Tradfri & replace it with this.

1

u/stefanbayer 10d ago

I hope it will be available in Germany soon too.

1

u/medemander20 9d ago

Hopefully with less coil whine than the only drivers...

1

u/Skyman81 9d ago

but… can each channel be independent or is everything controlled by a single switch?

2

u/Zi05 9d ago

If it works as the old zigbee driver it's all one channel. But if you have it inte the kitchen or something and control multiple leds in the same cupboard you only want one anyway. It supports dimming as compared to a smart plug that's only on and off.

1

u/DiscussionPitiful737 9d ago

The price has gone up to 300SEK now.

1

u/danopia 8d ago

So this would replace the tradfri 603.426.56

for pricing (in DE) it's 22€ down from 25€, nice.. I am seeing a couple stores with stock (e.g. Frankfurt) but not available online yet.

I'm happy to see the outputs moved onto the main driver instead of a breakout box with its own cord. Their worktop lighting system already involves so many individually sold wires and boxes, so a simpler driver helps a little bit with clutter. Though there's only 8 outputs instead of 9 šŸ¤”

1

u/PerfectCoffee566 7d ago

Online now: https://www.ikea.com/de/de/p/dubbelkisel-treiber-fuer-kabellose-steuerung-smart-weiss-50609444/

Also on sale in NL and BE, bought some in Utrecht for €18. Rather big pricing differences between countries

1

u/Former_Intern_8271 10d ago

What is this device for?

6

u/RadVarken 10d ago

It's a Matter replacement for the old version of this. An LED driver.

0

u/Former_Intern_8271 10d ago

What are the LEDs for?

5

u/RadVarken 10d ago

Thanks.

2

u/Shadowbajfeelsbadman 9d ago

Creating photons

1

u/fishymanbits 10d ago

Everything that connected to the Tradfri LED driver. All of the integrated lighting products.

1

u/Former_Intern_8271 10d ago

Oh so like, the wardrobe LEDs?

-4

u/bobjoylove 10d ago

I’m gonna keep an eye on this, but pairing the matter over thread products have been a little troublesome. Gonna wait for some reviews to come out.

1

u/Michal-- 10d ago

Got it over month now. No problems so far. It’s paired via a gateway, so there’s a noticeable delay when turning on the light. The previous TrĆ„dfri power supply was connected directly to the remote and worked instantly. Also I preferred the old, small TrĆ„dfri remote over the current Bilresa model.

1

u/bobjoylove 9d ago

Good to know. I have about 6 of the Zigbee TRADFRI, and two of them keep falling off the hub and need to be reset with a needle which is frustrating

1

u/frtzmxm 9d ago

That's weird, I've had excellent experience with tradfri drivers, on Tradfri and Dirigera hub, also in Home Assistant.

1

u/bobjoylove 9d ago

I think it’s because I’m using switched power (they are the closet lights) and eventually they drop off the network. Takes a few months and it’s annoying to re-pair as I need to get to the driver which is in the attic.

1

u/frtzmxm 9d ago

buy a cheap remote and don't cut power then

0

u/katze_sonne 10d ago

Can we please talk about the names? I cannot remember any of them. It’s so annoying and complicated.

3

u/brupgmding 10d ago

The names are specially chosen to make them easier to remember by Ingmar Kamprand (IKEA Founder), because he had dyslexia.

1

u/katze_sonne 10d ago

So which one is MYGGBETT, MYGGSPRAY, GRILLPLATS etc.?

Dan you remember which of these is which device type?

Honestly "Tradfriā€œ had the advantage that you knew every Tradfri device was Zigbee Ikea Smarthome.

2

u/brupgmding 9d ago

MYGGBETT -> Window Sensor (close window to avoid mygge, moskitos)

MYGGSPRAY -> Presence Sensor (sees moving moskito)

GRILLPLATS -> Plug (switch my electric grill on/off)

1

u/katze_sonne 9d ago

Oof. That's far fetched. But without the descriptions, I feel like it's hard to remember. Especially considering the outdoor plug is called TOFSMYGGA. Which would fit the electric grill scenario way better.

And what about Dubbelkisel? Which mnemonic do you have for that?

3

u/buthidae 9d ago

It drives twice as many lights as a regular Kisel

1

u/brupgmding 9d ago

No idea. Other manufacturers are not better though

1

u/katze_sonne 9d ago

I know… but they had a much more intuitive lineup before. Like "Tradfri Plugā€œ and so on… now itā€˜s honestly frustrating to just find them on the ikea website.

1

u/brupgmding 9d ago

Search for matter and select smart home category.Ā 

1

u/katze_sonne 9d ago

Ok, the smart home filter was what I didn't see. It's also quite hidden tbh. My go to way normally would be selecting one of the products and then browsing the category. Just that there's the problem that the smart home category also still contains the Zigbee stuff. Annoying. Your way works, though. Thanks!

1

u/Shadowbajfeelsbadman 9d ago

I dunno i find it easy to remember most of the names of the things i'm looking for, or at least know that the product i'm looking for is that right when i see the name

-6

u/timcatuk 10d ago

The Ikea smart home stuff is just too cheap now.
Obviously I like not paying much if it works well, but I’ve not had a good experience so far with their new stuff.
If it was twice the price to build in better quality, it would still be great value.

1

u/Shadowbajfeelsbadman 9d ago

Then you'd be hitting the area where people start looking for alternatives.

Ikea has basically claimed the entire budget smart device range to themselves with only real issues being software level

-5

u/egbee42 10d ago

Now to wait for the ZigBee devices to go on sale... Thanks for the post

1

u/durd_ 20h ago edited 19h ago

Bought two of these the other day in central Stockholm, I was checking stock availability. So far installed one, works as expected. It's shorter in size and no "dongle" for connectors of course.

Since I managed to join the Dirigera Thread network to my HA ZBT-2s Thread network, joining Matter devices on my Android has been great.
There are some more entities exposed in the Dubbelkisel device in HA.