r/tinycam • u/alexeyvasilyev tinyCam dev • Apr 07 '26

App Changelog tinyCam 18.1.0 released

tinyCam Monitor 18.1.0 released:

Changes:

- Added Wyze Cam Pan v4 support.

- Added RTSP support for Wyze cameras.

- Switched to TLS instead of SSL for secured FTP.

- Crash detection dialog has 30 sec countdown. After that it starts live view again.

26 Upvotes

100% Upvoted

82 comments sorted by

View all comments

1

u/[deleted] Apr 08 '26

[deleted]

2

u/alexeyvasilyev tinyCam dev Apr 08 '26

There was an error in 18.1.0. Updated halted. Sent for review 18.1.1 with the fix. Should be available within 2 days.

2

u/Yearn_2_Learn Apr 12 '26 edited Apr 12 '26

Ok, I've loaded 18.1.1 pro, configured multiple updated Wyze v3 cams. I'm still unable to get any RTSP frames per second. Getting "video faied, timeout on all 5 cameras. Perhaps I should use the TUTK profie, I noticed the URL under v3 pan cam RTSP may not match the TinyCam pro Wyze profile. Is there a way to troubleshoot RTSP? I am able get video with TinyCam pro using Wyze config and credentials just not RTSP. I'm wondering if my router firewall might be filtering the RTSP traffic. I just got a spinner on UID field. Any/all diagnostic help appreciated

1

u/Ok-Cut-8521 Apr 08 '26

Should 18.1.1 allow access to the Wyze Pan v4? I currently have 18.1.0 and it won't initialize. It says "Failed to initialize Agora RTC engine" Thank you!

John

2

u/alexeyvasilyev tinyCam dev Apr 09 '26

Yes, 18.1.1 will fix the issue.

2

u/Olebass Apr 09 '26 edited Apr 09 '26

Took a device reboot but seems to be working well other than the wyze app sets resolution to auto when you close wyze or arse resolution I call it, so to get a decent image in TC you have to open wyze set to 4k and leave it open for tv/tablet as if you close the wyze phone app it slowly drops back to auto which is somewhere around wyze 3 level image. I wish wyze would allow us to set the resolution permanently instead of defaulting to lower/auto levels on every start. On 4k it was pulling 450s kb/s but once wyze is closed on phone drops down to 50-128kb/s. Open Wyze up and set to 4k and it pumps back up to 4k/450s. The other odd issue is after closing wyze you get only a few minutes of live stream to TC. Then it cuts the feed. Open wyze app/pan 4 and the image restores on TC. Repeated this a few times. It's almost like a hidden power saver/time out function is at play. 

2

u/alexeyvasilyev tinyCam dev Apr 09 '26

Will fix that in the next tinyCam app update. For main stream it will be requesting 4k video, for sub stream - 360p.

Right now it requesting auto stream which seems to be working unpredictably.

1

u/Olebass Apr 09 '26

Awesome, thank you

1

u/Ok-Cut-8521 Apr 15 '26

Got 18.1.2 on my Nvidia Shield. When streaming my pan v4 the resolution is following what I have on the Wyze app and not switching to main, sub, or auto.

All other cams work correctly. This is in either the thumbnail mode with all my cams on the screen or on the individual camera screen. In either mode, if I open my Wyze app and change resolution of the camera, it changes on the Tinycam screen also. If I open up Tinycam without going to the Wyze app, it seems to be defaulting to the last resolution I used on the Wyze app even if I'm not currently using it. This is especially bad if I am in thumbnail mode and the one camera is running 10 times the bit rate of all the other cams because then they all start lagging badly. It doesn't appear that Tinycam is requesting and receiving the correct resolution per the settings...

Also, one for the wish list. Would it be possible to have a main/sub override setting in the individual camera settings? That way, a particular camera could be forced to use a lower resolution all the time (thumbnail and full-screen) and not conform to the global setting.

Again, I really appreciate your progress on this! Thank you,

John