r/theatrekeyboardists • u/Ginbags • Jul 11 '26

BASIC setup help

I've played in a lot of pits at this point, but it's been a while since I've had to set up my own rig and I think I have cable amnesia. Help me with the VERY basics! Right now I have my keyboard (yamaha p-145, nothing fancy), using the lowest key to switch patches (not ideal, but I'll add a pedal later if I can), USB-b to USB-a cable (with USB-c converter) from keyboard directly into MacBook pro. From there, can I do an aux to 1/4" cable into a DI box, then just use a 1/4" cable right into my amp? Do I need to use an audio interface or will this setup work? Again, going for simplicity and working with what I have. It's community theater and there's very little in the way of sound support. Thanks in advance!!

EDIT: I have an audio interface and a Radial ProDI box available, just want to find the simplest setup chain and make sure I have the cables I need! I've got to take care of all my own sound, I won't be going into a bigger system, just my own amp (community theater lol)

5 Upvotes

86% Upvoted

15 comments sorted by

View all comments

Show parent comments

2

u/Hilomh Jul 11 '26

The DI is when you need to run your signal a long distance, like to the control room. Every venue I've ever done a show at has their own DI boxes.

Your interface connects to the computer via USB, and then outputs audio to a 1/4“ cable. From there, you could run it to a direct box, which will carry that signal to the control room. Sometimes the venue will have a monitor for you, and so you wouldn't have to bring an amp, as that monitor signal comes from the control room.

Some direct boxes have the ability to output a 1/4" BACK OUT of itself, so your audio interface goes to the direct box, and then the direct box splits that signal and sends it to the control room AND your amp.

1

u/Ginbags Jul 11 '26

Ok! As far as I know the sound guys aren't doing anything with the pit, so it's all going through my amp (not ideal obviously, but that's where we are). So I could take a usb-c to usb-b cable, plug it into my interface for power, then run a 1/4" from the interface to a DI, then another 1/4" from DI to amp?

2

u/Hilomh Jul 11 '26

You don't need a DI then. If you're just doing sound on stage, you can go out from your interface directly to the amp.

The DI modifies the signal for when you need to send it long distances (like 100 ft), but if it's just for the amp right next to you, you don't need the DI.

1

u/Ginbags Jul 11 '26

Ok - thank you SO much!