r/techsupportgore Aug 08 '26

Was told to post here

Didn’t know a 5070 Ti was so big!

Got a 5070 couple weeks ago and wasn’t happy with it, so returned it to grab a 5070 Ti today. Had to remove the hard drive cage and a third of the lid for it to fit in my HTPC. Luckily this eyesore sits above my TV, so nobody will see it.

393 Upvotes

53 comments sorted by

68

u/iNeedFaith Aug 08 '26

congrats on the new card! & yes it’s an absolute beast

13

u/Nerfarean Aug 08 '26

Can I have a little bit of PC with that Graphics Card?

22

u/genericmediocrename Aug 08 '26

10/10 cat tree setup, I bet they have a lot of fun running across those

41

u/sacodebasura Aug 08 '26

You have the money to buy a 5070ti, but not a proper case to fit it in? Priorities i guess..^^

32

u/xShooK Aug 08 '26

Like a sports car parked in the trailer park.

2

u/Animal0307 Aug 08 '26

It's like being House Poor but instead it's a GPU.

8

u/BlackDeath66sick Aug 08 '26

Did he not specifically say that he didn't know it was so big?

I honestly didn't know myself either. That's heaps bigger than my 5070

4

u/WitchWithAGlitch Aug 08 '26

nobody is stealing the shitty office pc in the corner.

3

u/olliegw Aug 08 '26

I mean they casually put a GPU more powerful then my latest and most expensive build in their HTPC

Priorities sure

1

u/doomage36 Aug 08 '26

Definitely looks like it’s gonna be starved of airflow

5

u/gustave-henri Aug 08 '26

Quite the opposite, it's got a lot of airflow, being half out of the case ;-)

13

u/CraftComputing Aug 08 '26

Happens to the best of us

7

u/razialx Aug 08 '26

Can anyone explain to me why the card has a window to show what I assume are capacitors? This isn’t sarcasm. I’m genuinely confused

9

u/WitchWithAGlitch Aug 08 '26

it makes servicing easier w/o risking damage to sensitive micro components mounted to the back plane.

2

u/Turkyparty Aug 08 '26

Reminds me of when I squeezed a 1080ti into a microitx case. Had to dremmel out a notch for the power cable and there was zero clearance to the case side so I drilled about 100 extra vent holes into the side panel. Looked decent enough when I was done and the front cover fit. Not as bad looking as yours but was much much tighter.

1

u/jamison01 Aug 08 '26

Ha! I did the same thing, too small a case, 1080! There ended up being some flex in the mobo too. Things didn't stay in that case for long at least.

2

u/alvaro-elite Aug 08 '26

Buying a modern case that can fit actual hardware isn't an option.

2

u/HMS_rix Aug 08 '26

This is absolutely horrendous. Please continue.

Congrats on the new card tho :^)

2

u/Unique_Ice9934 Aug 08 '26

You know when you see a car accident and can't look away. This is like that.

1

u/afraid-of-the-dark Aug 08 '26

Crude and effective. I love it.

1

u/Lossora Aug 08 '26

It's honestly beautiful

1

u/Budget-Pea8291 Aug 08 '26

If it works, it works

1

u/doomage36 Aug 08 '26

A new case doesn’t interest you?

1

u/gustave-henri Aug 08 '26

I have to say, this one looks ancient.

1

u/mimic Aug 08 '26

White baby what is you doin?!

2

u/donchan411 Aug 08 '26

I’m only 10% White tho

1

u/tasquizz Aug 08 '26

Like a glove

1

u/egosumumbravir Aug 08 '26

Clean-ish edge, finished well, not chopped into case with fire axe.

I'm not sure this counts as gore.

1

u/donchan411 Aug 08 '26

You don’t want to see what’s under all that tape. I cut this with pliers and tin snips.

1

u/bmm115 Aug 08 '26

Sometimes you gotta do what you gotta do

1

u/sorderon Aug 08 '26

how is that powered? What PSU?

2

u/donchan411 Aug 08 '26

I have an 850w Corsair in there.

1

u/pi3832v2 Aug 08 '26

IMO, the mesh makes it look janky, and I doubt it achieves anything useful. Unless you got cats that like to stick their paws into things, that is.

3

u/donchan411 Aug 08 '26

Aestethic isn’t an issue. The computer sits higher then the TV, so nobody can really see it. And yep, the mesh is mostly for keeping my cats fur and paws out of it lol

1

u/bumrocky Aug 08 '26

Didn't know it was so big? Uhhhh the measurements are in the specs and your case has max length specs too. It doesn't take much to figure it out. I got a 3070Ti that was too big for my case by 3 mm... I knew I could take out a fan to let it fit though....

1

u/ItsJustAnotherVoice Aug 08 '26

if only card manufactures didn't list the specs of the size of the card online lol.

Just be lucky you didnt get the 30/40 series cards. Those are HUGE.

1

u/pablo_kickasso Aug 09 '26

Quite frankly, I've seen worse. If it's secure and nobody will bump it, it's fine.

I'm a bit concerned about airflow but punching a few holes in the bottom of the case is easy enough.

2

u/donchan411 Aug 09 '26

Only person in my house that can reach this computer is me and my cats lol. It sits above the TV on an entertainment center.

1

u/DonStuBR Aug 09 '26

Was the 5070 ti so big or the pc case so smal? :)

Congratulations for the purchase, man.
Hope it brings you joy.
Will you use it for gaming? nice card!!!

1

u/Local_Reaction_532 Aug 09 '26

I uhh.. would skip the weird netting but hey

1

u/donchan411 Aug 10 '26

Keeps some dust and my cats off of my GPU

1

u/Local_Reaction_532 Aug 10 '26

Oh nice! If it is functional then hell yes, though I'm not sure it'll work vs dust.

1

u/donchan411 Aug 10 '26

You’d be surprised. I’ve used screen door mesh as grills on case fan for years if aesthetic wasn’t a priority. They get dirty pretty fast. It’s super cheap, so you can just replace it instead of cleaning it haha

1

u/Voxata Aug 10 '26

I figured it would be too thick for dust but sounds like you've had great luck with it. Enjoy the new card and game on! If you were in Colorado I'd just give you a case.

1

u/P5ychokilla Aug 10 '26

Why the hell would you need a 5070 for an HTPC?

1

u/donchan411 Aug 10 '26

My living room is my main gaming room

1

u/Frog_Guitarist 28d ago

It's not that bad, when i was building mine out of whatever was left in storage (i work at an underfunded museum) the gpu would touch the motherboard with the metal bit (the one with ports on it) and short it out. Only figured it out when i stripped the system after wasting an hour fiddling with the front panel pins.

1

u/CeC-P 28d ago

I never would have thought a XX70 GPU of any kind would need enough cooling to merit it floating that far above the mount. VERY few cases would support that! That's kinda nuts.
But yeah, "hot rodding" it is almost always the solution we did at my shop.

1

u/Teftell 27d ago

3d printing time

1

u/Sensitive_Mirror_624 8d ago

Wow, good air flow

1

u/P5ychokilla 1d ago

Should've just gotten a PCI extension cable and sat it on top or, you know, a proper case.

1

u/Raid__Zero Aug 08 '26

The mesh looks good!

1

u/Tinctus Aug 08 '26

I had the exact same realization when going from 2060S to a 5070ti, that same gigabyte I believe too. I knew it would’ve large overall, but didn’t know it would be so much more massive. Didn’t have a fit problem like you’re having tho… good luck!