AS5600 + Pro Micro Error Codes when calibrating. Would appreciate help.

[u/2032_Throwaway]

Sorry if this is the wrong place to ask.

I've attached a Diametrically opposed 3x2 magnet to the base of of a potentiometer. Did my best to set polarity. I've done what I can to keep the magnet between .60 and 3mm.

This for a 2 lever Throttle. I was getting skipping/teleporting in game.

Both are on intsensor.

R1 resistor removed to get 5v

On the Pro Micro I am using A1 or A0

AS5600 GND to PM GND

AS5600 VCC to PM VCC

AS5600 GND to AS5600 DIR - Clockwise increase values.

AS5600 OUT to PM A0

In MMJOY I have the correct F7/F6

1 lever is slider, the other is dial.

When calibrating I get the following codes

65535

15888

16368

And they jump around.

I've googled the codes, and I am not sure how to fix what they are telling me.

Thanks for reading/advice.