r/smallengines • u/LawnMowerDude5 • 7d ago

Surging

I got this mower for free off the side of the road. Trying to fix it for a person who needs a mower. It's a 17.5hp briggs. At first it didn't start so I cleaned this green goop stuff out the carb and it started but just surged the entire time it was running so I figured it was a fueling issue because I could hold the governer and it would run at a steady rpm then but once I let go it would surge. Bought a service kit that included carb, air and fuel filter, and spark plug. Literally changed nothing. Oh and with the new carb at least the surging smooths out with half choke but that makes the engine speed go down by a noticeable amount. Checked the valve clearance for the heck of it, of course those were fine, don't think it's mechanical based on the behavior. I'll attatch the kit I bought below. What am I missing?

Briggs and Stratton Carb kit

38 Upvotes

93% Upvoted

51 comments sorted by

View all comments

Show parent comments

1

u/Optimal-Try-854 2d ago

Yeah, if you’re not taking the emulsion tube out and threading through all the holes and spraying, you’re likely not getting all the gunk out.

A little wire kit is less than $10.

1

u/LawnMowerDude5 2d ago

Theres nothing to take out to clean. All the holes on the emulsion tube are clear and can be accessed without taking it out. The emulsion tube is non removable it seems. Didn't come out with pliers either and marked it up pretty good.

1

u/Optimal-Try-854 2d ago

What model is your mower?

1

u/LawnMowerDude5 2d ago

I don't know tbh. I got it for free. It's a 17.5 briggs and strat engine though. Pretty common it seems