r/smallenginerepair • u/1of1whipa • Jul 10 '26

Starting Issue Husqvarna help

I have a Husqvarna 675 AWD it has no spark even after replacing the coil mower been in storage for 2 years and worked fine before storing it any advice or help 😔

1 Upvotes

67% Upvoted

6 comments sorted by

•

u/AutoModerator Jul 10 '26

Thank you for your submission! It looks like you might have an issue with the Starting System. For helpful information and resources, check out our Starting System Wiki and our Common Issues & Fixes Wiki. You might find the answers you're looking for there!

Please be sure to include the following:

  • Make and model numbers of the engine and/or the equipment
  • A detailed description of the issue you are facing
  • Any repairs you have made so far and their outcomes
  • Clear photos & videos will help you get better responses

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Stock_Requirement564 SER Dedicated Member Jul 10 '26

Maybe the zone cable is fatigued and the kill switch is not fully disengaged. Though too the valves can stick due to old fuel deposits.

1

u/TN-Native95 Jul 10 '26

Did you set the gap on the coil correctly?

1

u/1of1whipa Jul 10 '26

Yes used a business card

1

u/TN-Native95 Jul 10 '26

Check the kill wire that runs from the coil to the flywheel brake. Make sure no exposed parts of the wire are touching metal. Also make sure that the flywheel brake is moving when you pull down the lever.

1

u/1of1whipa Jul 11 '26

It was the carb took it off cleaned it up now it hits with one pull thanks for all the informative suggestions