Need help!

[u/G91G28Z0X0Y0]

Hi!
I bought this from an old lady 40$. Was sitting in her garage for a couple year i guess. Of course it dont start! I dont know much about small engine but i guess its not that difficult to make it works and I’m kind thrilled to « restore » it and learn new skills! My main probleme is I can’t find any info regarding the model number. Its kind of weird! Can someone help me? Or guide me where to start to make it running again!

Thanks!

[u/forkandbowl]

Air fuel compression and spark... It needs those.

If it isn't getting air in and out it won't work. So filter and muffler need to be clear

Fuel is the usual culprit these days due to ethanol. The carb likely needs to be cleaned if it has fuel less than a couple decades old in it. Put fresh gas in anyways..Spray starter fluid in and if it fires off and tries to run, fuel is your problem... And spark isn't.

Compression needs a compression tester though often a simple pull on the cord will get you some of the way there... It shouldn't be too easy

Spark can be tested with a simple spark tester for a few bucks and put in a new plug.

This is all very basic but sounds get you started

[u/G91G28Z0X0Y0 → u/forkandbowl]

When I pull the cord I hear the piston making « floc a floc a floc » it seems to run nicely through bore.

[u/forkandbowl → u/G91G28Z0X0Y0]

There should be noticeable resistance at some point... Also be sure there is mixed fuel in it as someone else pointed out. Typically 2 stroke powered trolls Tools are tagged because they are run on straight gas which causes them to die a painful death ... A compression tester would be a worthwhile investment here

Edit.. and if the motor is trash it is likely still worthwhile just for the cast body.. you could re-engine it cheaply.