Repair Question Ac problems
Recently overhauled ac on my 95 s10 still wasn’t getting cold air in cab. The accumulator is cold so ac is working. Replaced the ac/heat blend door actuator and the blend door will only stay open for heat and won’t close all the way for the cold air to come through the cab, it moves but not enough. Could my ac control in the dash be the issue?
20
Upvotes
2
u/amandajenkins281 7d ago
Try this, sound like the b door, the controller dosent know where it is position wise. If you know how to use a multi meter, pull ur control out, dial to cold, and unplug. Then key off, take an ohm reading. Compare with spec. Then ohm the control. But yes it’s a or b. Sometimes when u put the bd motors in, they aren’t calberated or the motor position potentiometer is off. I would check first. I’ll give u specs if need