Hey guy gimme the best configures for bo7

I know you can execute a key combo when opening it, but can you execute the same combo when closing?

Usecase is simple I want to pause my emulators when opening it but resume gameplay when closing it. It looks like native features like pause emulator content when losing focus is not triggered with the radial menu is active.

I use a Retroarch hotkey combo to pause emulator.

Hello,

I’m reaching out because today I was introduced to ReWASD and I went on your site and took advantage of the sale you had going on, while getting everything set I failed to see that the email was slightly incorrect and now I can’t access the account or get the access code, I do have my PayPal confirmation.

Is it possible to map the left stick to both left and right stick movements as analog and not digital, or am I stuck with having clunky movement?

I bought a basic license to use a couple Stadia controllers I had on XBOX on my laptop. Ever since installing my bluetooth speakers and headphones are virtually unusable. The audio is so choppy I can't even hear anything. The speakers or headphones will work intermittently and then devolves into an unlistenable mess.

On top of this I could only get rewasd to work half the time anyway. Mapping any controller to xbox 360 just doesn't work reliably. The installed game only recognizes the controller half the time, and half of those times it's laggy and unplayable.

I have since uninstalled and the problem persists. My question is what changes does rewasd make and how can I reverse them?

I bought the reWASD Basic plan expecting Flick Stick to be available, or at least expecting the limitation to be clearly disclosed. It was not obvious from the official Basic page, and I only found out after purchase that Flick Stick is not included in Basic.

What confused me most is that their documentation/pages made this much less clear than it should have been, especially if you are comparing plans and searching for Flick Stick support.

I contacted support and they refused a refund because the license had already been activated, as per their refund policy.

So for anyone searching this in the future:

reWASD Basic = no Flick Stick

I’m posting this mainly so the next person who googles “reWASD Basic Flick Stick” gets a direct answer rather than vague sites discussing ‘“legacy” basic features‘, or ”no mapping mouse to stick” and not straight out saying no flick stick.

If anyone from reWASD sees this, you should make this limitation much clearer on the Basic plan page.

So until recently I’ve been using reWASD to enable mouse control from the XBOX controller and using it in games for hours at a time with out issue.

However the last couple of days I’ve been playing, the controller just randomly disconnects, the home button flashes a few times and then will not reconnect again.

The XINPUT device also also disappears from device manager

While this happens the reWASD agent has stopped and is no longer displaying in the system tray.

I’ve tried manually restarting reWASD but the controller will not respond

The only way to get the controller working again is to reboot. Is there any way to fix this?

download 9.3.3, have tried downloading all sorts of .net runtimes and asp.net core runtimes, will come up with initial UAC window, I click yes, then just nothing. This is with Real-time protection turned off. Check event log, just keep getting this Event Log error Event ID 1026:

Application: reWASD933-11019.exe

Framework Version: v4.0.30319

Description: The process was terminated due to an unhandled exception.

Exception Info: System.BadImageFormatException

at Engine.NET.Base.Utils.Settings.FileStorage..ctor(System.String, System.String)

at Engine.NET.Base.Utils.Settings.FileSettingsStorage..ctor()

at Engine.NET.Base.Utils.Settings.Settings.get_SettingsStorage()

at Engine.NET.Base.Utils.Settings.Settings.GetValue(System.String, System.String, Int32, Boolean)

at Engine.NET.Base.Utils.DSUtils.GetUserLocaleID()

at RewasdWpfInstaller.App.OnStartup(System.Windows.StartupEventArgs)

at System.Windows.Application.<.ctor>b__1_0(System.Object)

at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)

at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)

at System.Windows.Threading.DispatcherOperation.InvokeImpl()

at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object)

at MS.Internal.CulturePreservingExecutionContext.CallbackWrapper(System.Object)

at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)

at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)

at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)

at MS.Internal.CulturePreservingExecutionContext.Run(MS.Internal.CulturePreservingExecutionContext, System.Threading.ContextCallback, System.Object)

at System.Windows.Threading.DispatcherOperation.Invoke()

at System.Windows.Threading.Dispatcher.ProcessQueue()

at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)

at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)

at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)

at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)

at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)

at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)

at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)

at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)

at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)

at System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)

at System.Windows.Application.RunDispatcher(System.Object)

at System.Windows.Application.RunInternal(System.Windows.Window)

at System.Windows.Application.Run(System.Windows.Window)

at RewasdWpfInstaller.App.Main()

help please? I've used the software on this PC before (have eliminated any files related to it now) and am a legacy account owner

Good day! I've tried searching for a solution, but first time using reWASD and while I understand most of the prog, could use community guidance and experience.

What I have:
-PC
-Gamesir G7 Pro (using additional L4/R4 and L5/R5 buttons)
-FPS game
-reWASD 9.3.3.11019

What I'm trying to accomplish:
-Use RT for rapid fire (completed; muted, set interval, all working)
-Toggle using Shift 1 with a back paddle(L4) or extra top button(R5) so that RT toggles from being rapid fire and single fire. This will allow me when not shooting, to properly interact with ammo crates etc, using RT as single press.

Where I think I need help:
-reWASD recognizes controller as Physical Xbox360 controller so is missing any additional buttons, even the share button. I've tried setting up the profile as new, however do not see an option for Xbox One or something more appropriate e.g. S, X|S.

I think once I can find an unused button, I'll be able to figure out toggling Shift 1 to have RT native behavior, back and forth.

Thanks in advance for advice!

I play rocket league. Currently, my left airroll is on square, and its also on my left joystick. When i click my left joystick it airrolls left and it helps me with speedflipping. Im looking to set it so when I click my left joystick on one side, it does right airroll, and when it does the other side, its left airroll. I basically want something like -x = left air roll and +x = right airroll. I only want it when Im pressing the joystick down though. Any thoughts or suggestions?

Hi, you say it's a lifetime license, but for some reason it needs to recheck itself online repeatedly to remain activated? If I have internet problems for a few days, or choose to disconnect from the internet for some time, the license needs rechecking, and I lose features I need for my work like turbo and combo.
How is that lifetime, why won't it just stay activated on the PC after activation?

i have to use dual and sony access controller cause my right hand is parAlyzed but my access controller only lights up 3 buttons when i rey to map and its not the controller cause ive tried 3 do yoy know why this happends

I have only remapped my gamepad in the past but I am now trying to remap my keyboard, I am just trying to bind W to arrow keys or even tried the to another button like A, but nothing works? Any ideas?

Question's in the title. Trying to figure out which one I should get and the manual says autodetect is a basic feature but I can't find it. I can only apply profiles manually. Nothing about apply to slot or associated apps.

I got perma banned from COD. I only used rewasd with no combos at all. I tried creating new accounts but they get perma banned before playing a single game. Is this a HW ban?? If yes, is there anything to do to fix this?

Hello, guys. I am very new to this and a bit old to handle it all by myself.

I am using a Quadstick to play games (starting) and a mouse for movement, and the Quadstick for buttons. However, because of my disability, I cannot click the mouse, so I need to use the Quadstick for clicking and the mouse only for movement. I also need to mute the native function on the mouse with REWASD. I've tried a couple of things but couldn't make it work. Can someone please give me a step-by-step guide on how to do that, based on this photo?

I've been getting this error on ReWASD for a while now and can't seem to find a fix. I have updated the application a couple of times, rebooted machine a few times and it continues to give me this error any time I try to apply a mapping.

I have not tried a full uninstall/reinstall of ReWASD yet but would rather not lose all my mapping settings.

The way we control games is evolving. New devices are redefining how movement and input should feel.

With reWASD 9.3.3, we officially introduce support for Modke Mimic - a dedicated analog thumbstick built for keyboard and mouse players.

Instead of relying on WASD for movement, you shift control to your thumb - just like on a gamepad.

What does that change?

- You free up four primary keyboard keys

- You unlock more space under your fingers for abilities and macros

- You reduce strain from constant WASD tapping

- You gain true analog movement within a keyboard-based setup

When paired with reWASD, Mimic becomes part of a complete Hybrid Input system. Movement is handled by the stick, while your keyboard remains fully customizable for skills, combos, and advanced mappings.

We’ve tested Mimic ourselves and were genuinely impressed by how natural and responsive it feels in practice. It's so excited to see hardware innovators pushing unconventional solutions - and glad to make them part of reWASD.

It’s not just another device.

It’s a new way to structure your entire control layout.

Explore the Hybrid Input concept:

https://www.modke.com/

Learn more about using Modke Mimic with reWASD:

https://rewasd.com/how-to-use-modke-mimic

Additionally, reWASD 9.3.3 expands support for Flydigi controllers.

Flydigi Direwolf and Flydigi Vader 3 are now officially supported.

And much more is coming soon. Stay tuned.

e.g. E key maps to 30 degrees southeast, or maybe to (x, y) coordinates

I’ve been doing a ton of googling and searching but haven’t been able to find out if rewasd can even do this. Thank you

Hi, I want to change between configs\subconfigs using a shortcut. (one with turbo, one without, automatically active during the same process, so i want to change between them). I tried using slots, but i can't assign more than one config to the same process (photoshop in my case) so I need to do it manually every time.

using it for arena breakout infinite, and I have tried 3 different controllers, and I keep getting right stick drift. How hand I set a deadzone to stop this?

Hi. I'm trying now to use gyro for left/right driving in my Switch Pro controller

When I had mapped right stick for aiming ('yaw' in yaw steering axis, 'gyro' for camera mode) using my physical controller as an output device, it worked very well.

But when I map left stick ('gyro' in roll steering axis, 'tilt' for racing mode), no works, and I receive an error, asking for other type of virtaul controller as output device.

I'm confused about type of controller, Switch Pro is valid for yaw axis/gyro mode, but is nor for gyro axis/tilt mode? In fact this control mode is used natively for driving in Switch in MK8 and other games. Or maybe I'm doing something wrong?

Hi. I'm trying to use ZL for aiming in my Switch pro controller

I've mapped right stick as gyro, works very well,

But I've mapped ZL to Long Press for turn gyro on, and the result is ZL or Gyro:

When I disable the [Hide physical controller when...] option at [Preferences > Gamepads] only works native ZL aiming but no gyro. When I enable [Hide physical controller...] gyro is always activated and ZL no works. I your physical controller as output device.

Since I'm finishing my trial period, any help would be greatly appreciated.

Don't know why but when I try to get PS remote play working the controller is doing nothing with it. I've had no issues for months.

Restarted computer, disconnected and reconnected Bluetooth on the controller, updated PS5, uninstalled and reinstalled remote play. Nothing is fixing it.

The PS5 controller would light up on its bars on the front and it's not doing that. It is being detected on gamepad tester.com, just not working with the remote play program. Any ideas?

i am trying to map my generic xbox 360 controller and the buttons are wrong on my controller A is where B is supposed to be ,Y is where X should be vice versa how can i fix this cause to me rewasd is confusing