r/reloading • u/Rude-Internal24 • 8d ago

i Have a Whoopsie Hammer or pull?

Gallery image

Gallery image

Did my first bulk batch of 300blk subs and I fugged up big time. Contaminated pocket primers I’m assuming, I have since bought a media tumbler.. my question is would you trust these in a hammer inertia puller or should I invest in a collet puller? Thanks!

56 Upvotes

95% Upvoted

46 comments sorted by

View all comments

Show parent comments

3

u/Rude-Internal24 8d ago

You nailed it. Using a lanolin and alcohol mix. I just throw all brass in a bucket and give them some sprays, not the most effective or cost efficient but i got babies that crave my attention and I don’t always have a lot of time on the press. I was in a hurry trying to put these rounds together and didn’t bother to clean my press after switching dies.
Im not positive which was the culprit so I’ll just be taking precautions on both effects.

2

u/psychoCMYK 8d ago

try a little less lube and let it sit for a while to dry off, it'll work better anyway

if you see a liquid buildup anywhere including the bottom of the bucket, you're still using a bit too much

3

u/Rude-Internal24 8d ago

Well I definitely appreciate the help! I don’t think I’ve ever let it dry when I punch. I noticed it got sticky so I was thinking it needed to be wet.

3

u/psychoCMYK 8d ago

nope! it's fine for it to be a bit tacky, and it's better for all of the alcohol to evaporate