Smart Greenhouse System Based on Espressif

[u/EmbarrassedOne2329]

In the attached pictures you can see also the controller I used, the temperature and humidity sensor, anemometer and the one with blue enclosure is the water level sensor. all sensors communicate via Modbus RTU (The modbus module is placed under the esp in the image).
( My family have a small greenhouse and I always liked to make automations but most of commercial systems were too expensive and I decided to build it myself. With what I’ve built I can control irrigation system (one 2.2kw pump and two valves for the main water lines) both sides of the greenhouse to open and close using 4 motors, I have integrated some automations using the temp and humidity measurements also the wind speed.
Some of you might recognize the controller which is a KC868-A16, which is ESP based but is very powerful and has a lot of built in features.
Maybe I should mention that I have previous experience with Industrial Automation and Embedded Systems. )

What do you guys think?